Wednesday, December 10, 2008
Subscribe to:
Posts (Atom)
skip to main |
skip to sidebar
Mechanics of Material: Cross-Section View
We are standing at the southern most tip of mainland Asia
International Conference on Advancement in Materials and Nanotechnology (ICAMN) 2007
SHAHRIL ANUAR BAHARI
About Me
- SHAHRIL ANUAR BAHARI
- Shah Alam, Selangor, Malaysia
- Mr Shahril is a lecturer from Faculty of Applied Sciences, University of Technology MARA (UiTM) Malaysia. His area involves science and engineering of bio-composite materials. He is particularly interested in the mechanical strength performance of bio-based composites and bamboo-based composites materials for both structural and non-structural application.
Mr Shahril's Profile and Activities
SHAHRIL ANUAR BAHARI
Lecturer
Address:
Bio-Composite Technology Program,
Faculty of Applied Sciences,
University of Technology MARA (UiTM) Malaysia,
40450 Shah Alam,
Selangor Darul Ehsan, Malaysia
Telephone:
603-55444625 (Office)
6019-3884618 (Mobile)
Facsimile:
603-55444562
E-Mail Address:
shahril721@salam.uitm.edu.my
sabahari_77@yahoo.com
“Composing Nature in Life”
PERSONAL PARTICULARS
Full Name : Shahril Anuar Bin Bahari
Date of Birth : 13 June 1977
Place of Birth : Tapah, Perak, Malaysia
Nationality : Malaysian
Race : Malay
Religion : Islam
Gender : Male
Marital Status : Married
AREA OF SPECIALIZATION
Composite Mechanics & Physics
Research Interests:
-Mechanical Strength and Physical Performance of Engineered Composite and Bio-Composite
Materials
-Mechanical Strength and Physical Performance of Bamboo and
Bamboo-Based Composite Materials
-Development of Binderless Board Products
-Conversion of Agro-Industrial Wastes into Value
Added Products
EDUCATIONAL BACKGROUND
M. Sc. (Wood Science and Technology), 2005
University of Technology MARA (UiTM) Malaysia
Thesis: Modes of Failure and Microscopic Failures of
Betong Bamboo Strips Loaded in Shear, Bending, Tension
and Compression
B. Sc. (Furniture Technology), 2002
University of Technology MARA (UiTM) Malaysia
Thesis: Strength Properties of Laminated Gigantochloa
scortechinii (Semantan Bamboo)
Diploma (Mechanical Engineering), 1999
University of Technology MARA (UiTM) Malaysia
Final Year Project: Survey on Cumulative Trauma
Disorder (CTD) Among Typists in UiTM: Relationship
between Bio-Mechanics and Office Furniture Workstation
Design
WORKING EXPERIENCE
November 2005 – Present
Lecturer
Faculty of Applied Sciences
University of Technology MARA (UiTM) Malaysia
August – December 2005
Part-Time Research Assistant
Institute of Tropical Biocomposite (INTROB)
University of Putra Malaysia (UPM) Malaysia
July 2004 – November 2005
Research Assistant
Research Management Institute (RMI)
University of Technology MARA (UiTM) Malaysia
June 2003 – September 2004
Part-Time Tuition Teacher
Mercu Kecemerlangan Tuition Centre and Malkhah
Tuition Centre
Shah Alam, Malaysia
July – September 2001
Practical Trainee
Guthrie Furniture Sdn. Bhd.
Shah Alam, Malaysia
TEACHING EXPERIENCE
I. Lectures and Laboratories
A. B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Bio-Composite Technology II (BCT597), Lecture and Laboratory
2. Bio-Composite Technology I (BCT567), Lecture and Laboratory
3. Structure and Identification of Cellulosic Materials (BCT441), Lecture and Laboratory
4. Static and Strength of Materials (BCT421), Laboratory
5. Physical and Chemical Properties of Cellulosic Materials (BCT465), LaboratoryB.
B. Sc. (Hons.) in Material Technology, Faculty of Applied Sciences, UiTM Malaysia
Strength of Materials (PST541), Laboratory
C. B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Furniture Strength and Testing (FUR505), Lecture and Laboratory
2. Wood Composite (FUR265), Lecture
3. Furniture Manufacturing II (FUR453), Lecture and Laboratory
II. Thesis Supervision
A. As Chairman / Major Advisor
B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Mohd Syahrizul Chik, Investigation on Heat and Friction Resistance of Automotive Brake Pad Composed with Coconut Husk Dust
2. Nurul Ain Noor Rahman, Investigation on Heat and Friction Resistance of Automotive Brake Pad Composed with Rice Husk Dust
3. Muhammad Rahimi Ramli, Investigation on Hardness and Impact Properties of Automotive Brake Pad Composed with Coconut Husk Dust
4. Khairul Hafizee Isa, Investigation on Hardness and Impact Properties of Automotive Brake Pad Composed with Rice Husk Dust
5. Kamrie Kamlon, Performance of Recycled Polymer Composite Reinforced with Different Percentage of Rice Husk Flour
6. Mohd. Faizal Izwan Salihuddin, Performance of Recycled Polymer Composite Reinforced with Different Percentage of Coconut Shell Flour
7. Muhamad Yunus Abd Hamid, Effects of Different Resin Types and Environmental Exposures on Compression Perpendicular Loading of Bolted Joint Laminated Bamboo Strips Lumber
8. Muhammad Najmuddin Hashim, Effects of Different Resin Types and Environmental Exposures on Compression Parallel Loading of Bolted Joint Laminated Bamboo Strips Lumber
9. Wan Nor Raihan Wan Jaafar, Influence of High Frequency Heating and Layer Orientation on Mechanical and Physical Properties of Multi Laminar Bio-Composite Board
10. Balkis Fatomer A Bakar, Effects of Resin Content Levels and Environmental Exposures on Mechanical Strength and Physical Performance of High Density Agricultural Wastes Particleboard
11. Nurul Alyaa Abdul Malek, Effects of Resin Content Levels and Environmental Exposures on Mechanical Strength and Physical Performance of High Density Bamboo Particle Composite Board
12. Saeid Mubarak Jamalullain, Bending Strength and Electrical Resistance of Polymer Composite Reinforced With Coconut Husk Particle
13. Mohd Khairi Yahya, Bending Strength and Electrical Resistance of Polymer Composite Reinforced With Pineapple Leaves Particle
14. Sitiarfah Abu Bakar, Mechanical Strength Evaluation on Agro-board for Lightweight Interior Construction
15. Mohd Safuan Nadzin, Analysis on Mechanical and Physical Properties of Bagasse Board for Building Components
B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Siti Aidaliza Subardi, Mechanical Properties of Binderless Bamboo Fibreboard (BBF)
2. Tengku Maliana Ku Yusof, Effects of Different Resin Types and Resin Content Levels on Strength Properties of Particleboard Made from Petai Belalang (Leucaena leucocephala)
3. Hafizah Samsudin, Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction
4. Mohd Ikram Ariffin, Effects of Different Resin Types and Resin Content Levels on Mechanical and Physical Properties of Particleboard Made from Semantan Bamboo (Gigantochloa scortechinii)
5. Mohd Hafiz Musa, Effect of Different Pressing Methods and Pressing Times on Springback Properties of Bent Laminated Bamboo Strips Lumber (bLBSL) for Furniture Component
B. As Co-Advisor
B. Sc. (Hons.) in Environmental Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Suzana Ibrahim, Influence of Different Treatment and Beating Processes on Strength Properties of Paper from Sugarcane Waste
2. Siti Suraya Daud, Strength Properties of Paper from Coconut Husks at Different Ages and Fibre Sizes
B. Sc. (Hons.) in Textile Technology, Faculty of Applied Sciences, UiTM Malaysia
Munirah Anuar, Mechanical Properties of Agricultural Waste Composite Board Reinforced with Textile Fabrics
B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Akmal Mohamed Isa, Physical and Mechanical Properties of Solid Petai Belalang (Leucaena leucocephala)
2. Noor Azrieda Abd Rashid, A Study on Botanical Characters and Anatomical Features of Kenaf (Hibiscus cannabinus l.) as Future Bio-Composite Material
3. Nur Hannani Abdul Latif, Surface Roughness Evaluation of Bamboo Furniture Components Using Stylus Contact Method
4. Mohd Esmael Ariff Osman Wahid, Effects of Surface Roughness of Laminated Bamboo Furniture Components on Glueline Performance
5. Nur Afida Mohd Rafik, Effects of High Frequency Heating on the Bonding Performance of Laminated Bamboo
RESEARCH EXPERIENCE
1. Physical and Mechanical Strength Characterization of Hybrid Composite Material from Fabric-Reinforced Agricultural Waste Particles
Mohd Iqbal Misnon (Project Leader) & Shahril Anuar Bahari
UiTM’s Excellence Fund
November 2008 – Present
2. Evaluation on Mechanical and Physical Properties of Particle-Based Composite Panel Board Made From Agro-Industrial Waste Materials
Shahril Anuar Bahari Project Leader), Mansur Ahmad & Mohd Ariff Jamaludin
UiTM’s Excellence Fund
May 2008 – Present
3. The Analysis of Forest Tree Diseases in Relation to Vegetative Characteristics at Kuala Keniam, Taman Negara, Pahang, Malaysia
Mansur Ahmad (Project Leader), Mohd Nazip Suratman, Shahril Anuar Bahari & Suriana Rofie@Rafie
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
May 2007 – Present
4. Tree Species Diversity of Kuala Keniam, Taman Negara, Pahang, Malaysia
Mohd Nazip Suratman (Project Leader), Mazlin Kusin, Mansur Ahmad, Shahril Anuar Bahari, Judith Gisip, Suriana Rofie@Rafie & Azrena Abdul Karim
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
May 2007 – Present
5. Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction
Project Code: 600-IRDC/ST/FRGS5/3/1145)
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin & Mansur Ahmad
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006 – Present
6. Strength and Performance Properties of Environmental-Friendly Sandwich Panel Using Binderless Bamboo Medium Density Fiberboard (bBMDF) as Core Material
(Project Code: 600-IRDC/ST/FRGS.5/3/1156)
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Azrena Abdul Karim
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006 – Present
7. Utilization of Pioneer Forest Species in the Production of Environmental-Friendly Inorganic Bonded Bio-Composite Panels
Razali Abdul Kader (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Shahril Anuar Bahari
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006 – Present
8. Mechanical and Physical Behaviour of Bamboo Particleboard
Shahril Anuar Bahari
Institute of Research, Development and Commercialization (IRDC), UiTM
June 2006 – June 2008
9. Design and Development of Structural Composite Lumber Using Malaysian Bamboo Species
Mansur Ahmad (Project Leader), Mohd Ariff Jamaludin, Kamarulzaman Nordin & Mohd Tamizi Mustafa
Shahril Anuar Bahari (Research Assistant)
Intensification of Research in Priority Areas (IRPA)
Ministry of Science, Technology and Innovation Malaysia
July 2004 – November 2005
10. Modes of Failure and Microscopic Failures of Malaysian Bamboo Species
Mansur Ahmad (Project Leader/Advisor), Kamarulzaman Nordin & Roslan Ali
Shahril Anuar Bahari (M. Sc. Student)
Ministry of Science, Technology and Innovation Malaysia
Institute of Research, Development and Commercialization (IRDC), UiTM
December 2001 – June 2005
11. Strength Properties of Laminated Gigantochloa scortechinii (Buluh Semantan)
Kamarulzaman Nordin (Project Leader/Advisor)
Shahril Anuar Bahari (B. Sc. Student)
Faculty of Applied Sciences, UiTM Malaysia
December 2000 – October 2001
EXTENSION SERVICES
1. Vice-Secretary
The Committee of Science and Technology New Area Development
Centre for Strategic Planning, UiTM Malaysia
May 2008 – Present
2. Internal Auditor
Faculty of Applied Sciences, UiTM Malaysia
February 2008 – Present
3. Evaluator Panel
Science and Mathematic Publication Award
University Publication Centre (UPENA), UiTM Malaysia
January 2008
4. Member
The Committee of Technical Paper & Exhibition
National Conference on Forest Products 2008
Forest Research Institute Malaysia (FRIM) and UiTM Malaysia
August 2007 – October 2008
5. Member
The Committee of Vice Chancellor Excellent Award (AKNC)
Faculty of Applied Sciences, UiTM Malaysia
July 2007 – Present
6. Member
Examination Committee
Faculty of Applied Sciences, UiTM Malaysia
March 2007 – Present
7. Technical Evaluator Panel
Fundamental Research Grant Scheme (FRGS)
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
March 2007
8. Member
Program Development Committee
Master of Science in Agro-Industrial Forestry (M. Sc. by Coursework)
Faculty of Applied Sciences, UiTM Malaysia
September 2006 – Present
9. Students Academic Advisor
B. Sc. (Hons.) in Bio-Composite Technology
Faculty of Applied Sciences, UiTM Malaysia
July 2006 – Present
10. Students Academic Advisor
B. Sc. (Hons.) in Furniture Technology
Faculty of Applied Sciences, UiTM Malaysia
January – April 2006
11. Member
Program Revision Committee
B. Sc. (Hons.) in Furniture Technology
Faculty of Applied Sciences, UiTM Malaysia
January 2006 – Present
12. Member/Facilitator
Students’ Leadership & Development Training Module
Students Affair Department and Faculty of Applied Sciences, UiTM Malaysia
December 2005 – July 2007
13. Member/Part-Time Student
Academic Division
Certificate
Received the certificates in 2005 and 2006:
· Certificate in Islamic Study: Syariah Islamiah, 2006
· Certificate in Islamic Study: Pengantar Fiqh, 2005
Sultan Salahuddin Abdul Aziz Shah Mosque, Shah Alam, Malaysia
December 2004 – Present
CONSULTANCY EXPERIENCE
Bio-Diversity Inventory: Documentation on Timber and Non-Wood Forest Products in Sungkai Forest, Malaysia
Mohd Nazip Suratman (Leader), Mazlin Kusin, Shahril Anuar Bahari & Suriana Rofie@Rafie
Department of Wildlife and National Parks (PERHILITAN) Malaysia
February 2007
AWARDS & RECOGNITIONS
1.Bronze Medal Award
“Agroboard”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Judith Gisip, Mohd Safuan Nadzin, Nurul Nadiah Mohd Firdaus Hum & Sitiarfah Abu Bakar
Invention, Innovation and Design (IID) 2009
Research Management Institute (RMI), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
13 – 15 January 2009
2.Bronze Medal Award
“Portabelle”
Judith Gisip (Project Leader), Suhaili Mohamad & Shahril Anuar Bahari
Invention, Innovation and Design (IID) 2009
Research Management Institute (RMI), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
13 – 15 January 2009
3.Silver Medal Award
“Nangka Board: Product Diversification from Agriculture”
Rosmas Sarnua, Mohd Nazip Suratman & Shahril Anuar Bahari
Invention, Innovation and Design (IID) 2009
Research Management Institute (RMI), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
13 – 15 January 2009
4. Research Project Grant Award (RM 30,000.00)
“Evaluation on Mechanical and Physical Properties of Particle-Based Composite Panel Board Made From Agro-Industrial Waste Materials”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad & Mohd Ariff Jamaludin
UiTM’s Excellence Fund
May 2008
5. Bronze Medal Award (Materials Category)
“Binderless Bamboo Fibre-Based Composite for Indoor Construction Material”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohamad Jani Saad
19th International Invention, Innovation and Technology Exhibition (ITEX) 2008
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
9 – 10 May 2008
6. Gold Medal Award (Building and Construction Materials Category)
“Bio-Composite Panel Board Made From Bamboo Particle”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohamad Jani Saad
36th International Exhibition of Inventions, New Techniques and Products 2008
Swiss Federal Government
Geneva Palexpo, Geneva, Switzerland
2 – 6 April 2008
7. Ecology-Friendly Award from International Ecology Fund
“Particleboard Made From Bamboo Skin Waste”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
8. Bronze Medal Award
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
9. Ecology-Friendly Award from International Ecology Fund
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
10. Iran Special Award: Diploma of Honour
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
11. Property, Patent & Trademark
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
12. Gold Medal Award (Invention Category)
“Bimboard”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
13. Silver Medal Award (Invention Category)
“Bamper”
Shahril Anuar Bahari (Project Leader), Azizi Abd Jalil & Mohd Rozemy Mohamad Ghazali
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
14. Bronze Medal Award (Invention Category)
“Bamboo Scaffolding”
Shahril Anuar Bahari (Project Leader), Mohd Nazarudin Zakaria, Mohd Ariff Jamaludin, Mansur Ahmad & Kamarulzaman Nordin
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
15. Bronze Medal Award (Innovation Category)
“Microwave Treated Bamboo – Novel Approach towards Enhancing the Strength Properties of Gigantochloa scortechinii (Semantan) Bamboo”
Kamarulzaman Nordin (Project Leader), Othman Sulaiman, Mohd Ariff Jamaludin & Shahril Anuar Bahari
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
16. Bronze Medal Award (Invention Category)
“Lightweight Furniture from Petai Belalang Timber”
Judith Gisip (Project Leader), Shahril Anuar Bahari, Akmal Mohamed Isa & Mohamad Ridzuan Samsury
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
17. Bronze Medal Award
“Moulded Laminated Bamboo Lumber for Furniture Components”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Hafiz Musa & Mashitah Abu Kassim
Malaysia Technology Expo (MTE) 2008
Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia
21 – 23 February 2008
18. Silver Medal Award
“Bio-Composite Panel Board Made From Bamboo Particles”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohd Ikram Ariffin
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
19. Bronze Medal Award
“Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
20. Bronze Medal Award
“Bending Strength Properties of Bamboo Strips”
Shahril Anuar Bahari(Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
21. Silver Medal Award
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
22. Silver Medal Award
“Particleboard Made From Bamboo Skin Wastes”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
23. Best Poster Presentation Award
“Effect of High Frequency Pressing Method (HFPM) on Springback Behaviour of Bent Laminated Bamboo Strips Lumber (BLBSL)”
Shahril Anuar Bahari (Project Leader), Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa
3rd Colloquium on Materials, Minerals and Polymers (MAMIP) 2007
School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM)
Vistana Hotel, Penang, Malaysia
10 – 11 April 2007
24. Gold Medal Award (Invention Category)
“Eezy-Picture Frame”
Kamarulzaman Nordin &(Project Leader), Shahril Anuar Bahari
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM, Shah Alam, Malaysia
24 – 25 January 2007
25. Silver Medal Award (Invention Category)
“Moulded Laminated Bamboo Lumber for Furniture Components”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin & Mashitah Abu Kassim
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM, Shah Alam, Malaysia
24 – 25 January 2007
26. Bronze Medal Award (Invention Category)
“Potential of Bamboo as an Alternative Raw Material through Production of Bio-Composite Panel Board for Interior Construction Uses”
Shahril Anuar Bahari (Project Leader), Mohd Ikram Ariffin, Mansur Ahmad & Kamarulzaman Nordin
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
27. Bronze Medal Award (Innovation Category)
“Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
28. Bronze Medal Award (Innovation Category)
“Effect of Culm Height Levels and Node Presence on Maximum Bending Stress of Semantan Bamboo (Gigantochloa Scortechinii) Strips”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
29. Bronze Medal Award (Invention Category)
“Particleboard Made From Bamboo Skin Wastes”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mansur Ahmad & Mohd Ariff Jamaludin
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
30. Bronze Medal Award (Invention Category)
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
31. Research Project Grant Award (RM 31,000.00)
“Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin & Mansur Ahmad
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006
32. Research Project Grant Award (RM 8,000.00)
“Strength and Performance Properties of Environmental-Friendly Sandwich Panel Using Binderless Bamboo Medium Density Fiberboard (bBMDF) as Core Material”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Azrena Abdul Karim
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006
33. Gold Medal Award
“Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
The British Invention Show 2006
Alexandra Palace, London, UK
18 – 21 October 2006
34. Silver Medal Award
“Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
17th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2006
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
19 – 21 May 2006
35. Silver Medal Award (Invention Category)
“Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
Inventions, Innovations and Designs (IID) 2006
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
19 – 20 January 2006
36. Bronze Medal Award (Innovation Category)
“Failure Properties of Betong Bamboo Strips Loaded in Bending”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin Inventions, Innovations and Designs (IID) 2006
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
19 – 20 January 2006
37. Bronze Medal Award
“New Concept Modular Console Table”
Kamarulzaman Nordin (Project Leader), Zainal Ripin, Mohd Ariff Jamaludin, Mansur Ahmad, Shahril Anuar Bahari & Mohd Nazarudin Zakaria
IPTA Research and Development Exhibition 2005
Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia
19 – 21 May 2005
LIST OF PUBLICATIONS
I. BOOK
Judith Gisip, Shahril Anuar Bahari, Kamarulzaman Nordin & Azrena Abdul Karim. (2007). Laboratory manual on experiments of anatomical, physical and mechanical properties of wood. Published by University Publication Centre (UPENA), Universiti Teknologi MARA (UiTM). ISBN 978 983 3644 830.
II. JOURNALS
1. Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin. Tensile mechanics of bamboo strips. American Institute of Physics. In review.
2. Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin. Analysis on strength behaviour of malaysian bamboo species. American Institute of Physics. In review.
3. Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh. The bending strength, internal bonding and thickness swelling of multilayer sandwiched bamboo particleboard. American Institute of Physics. In review.
4. Mohd Ariff Jamaludin, Kamarulzaman Nordin, Shahril Anuar Bahari & Mansur Ahmad. The effect of veneer layers on the bending shear strength and delamination of laminated veneer lumber (lvl) from oil palm trunk (opt). American Institute of Physics. In review.
5. Shahril Anuar Bahari & Mansur Ahmad. Effect of culm height levels and node presence on mechanical properties and fracture modes of gigantochloa scortechinii strips loaded in shear parallel to grain. Bamboo Science and Culture. The Journal of American Bamboo Society, USA. In review.
6. Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin. (2007). Environmental friendly sandwich panel using bamboo skin wastes as core material. Journal of Key Engineering Materials. Vol. 334 – 335. Advances in Composite Materials and Structures. Trans Tech Publication, Switzerland. ISBN-13 978-087849-427-9. Pp. 41 – 44.
III. PROCEEDINGS
1. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Siti Aidaliza Subardi, Mohamad Jani Saad & Kamarulzaman Nordin. (2008). Characterization on bending strength of binderless bamboo fibreboard (bbf). Proceeding of 9th Pacific Rim Bio-Based Composites Symposium 2008. Published by Australia’s Commonwealth Scientific and Industrial Research Organisation (CSIRO) and Scion New Zealand. Pp. 238 – 246.
2. Mohd Ariff Jamaludin, Shahril Anuar Bahari & Kamarulzaman Nordin. (2008). Sandwiched bagasse particleboard as a lightweight material for the furniture and building construction industries. Proceeding of 9th Pacific Rim Bio-Based Composites Symposium 2008. Published by Australia’s Commonwealth Scientific and Industrial Research Organisation (CSIRO) and Scion New Zealand. Pp. 203 – 207.
3. Shahril Anuar Bahari, Mansur Ahmad, Mohd Ariff Jamaludin, Kamarulzaman Nordin & Mohd Ikram Ariffin. (2007). Potential of bamboo as an alternative raw material through production of bio-composite panelboard for light weight interior construction uses. Proceeding of International Panel Products Symposium 2007 (IPPS 2007). Published by The Biocomposite Centre, Bangor University, United Kingdom. ISBN 978-1-84220-097-1. Pp. 319 – 326.
4. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Hafizah Samsudin. (2007). Laminated bamboo strip lumber (lbsl). Proceeding of International Panel Products Symposium 2007 (IPPS 2007). Published by The Biocomposite Centre, Bangor University, United Kingdom. ISBN 978-1-84220-097-1. Pp. 327 – 332.
5. Shahril Anuar Bahari, Tony Boniface, Kamarulzaman Nordin, Mohd Ariff Jamaludin & Mohd Hafiz Musa. (2007). Analysis on springback percentage (sp) of bent laminated bamboo strips lumber (blbsl) using different pressing methods. Proceeding of the 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-04-0. Pp. 107 – 109.
6. Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa. (2007). Effect of high frequency pressing method (hfpm) on springback behaviour of bent laminated bamboo strips lumber (blbsl). Proceeding of the 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-04-0. Pp. 248 – 250.
7. S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin. (2006). Failure behaviour of betong bamboo strips loaded in shear. Findings of the Young Researchers on Applied Science 2006 (CAS 2006). Vol. 1, Physics and Material Science. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 983-3643-17-5. Pp. 173 – 179.
8. S. A. Bahari, K. Nordin, R. Wahab, M. Ahmad & M. A. Jamaludin. (2006). Compression strength properties of laminated bamboo lumber (lbl) for small construction applications. Findings of the Young Researchers on Applied Science 2006 (CAS 2006). Vol. 1, Physics and Material Science. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 983-3643-17-5. Pp. 247 – 249.
9. Bahari, S. A. & Ahmad, M. (2005). Modes of failure and strength properties of dendrocalamus asper (buluh betong) loaded in tension. Proceeding of 3rd USM-JIRCAS Japan Joint International Symposium: Lignocellulose; Materials for the Future from the Tropics. JIRCAS Working Report No. 39, Japan. ISSN 1341-710x. Pp. 277 - 280.
10. Bahari, S. A., Ahmad, M. & Jamaludin, M. A. (2004). Microscopic failure of dendrocalamus asper(buluh betong) loaded in tension. Proceeding of Seminar Kebangsaan Sains Teknologi dan Sains Sosial (STSS) 2004. Jilid 1: Sains Teknologi. ISBN 983-40671-6-x. Pp. 400 - 405.
11. Shahril Anuar Bahari & Mansur Ahmad. (2004). Failure modes and strength behaviour of dendrocalamus asper (buloh betong) loaded in tension. Conference on Scientific and Social Research (CSSR) 2004, Kuching, Sarawak. 19-21 May 2004.
IV. RESEARCH ABSTRACTS
1. Shahril Anuar Bahari, Tengku Maliana Ku Yusof, Judith Gisip & Mohd Ariff Jamaludin. (2008). Characterization on strength behaviour of single-layer particleboard from leucaena leucocephala. Research Abstract. National Conference on Forest Products 2008 (NCFP 2008). Published by Forest Research Institute Malaysia (FRIM).
2. Judith Gisip, Shahril Anuar Bahari, Ridzuan Samsury & Akmal Mohamed Isa. (2008). Petai belalang composite panel board as a potential material for furniture components. Research Abstract. National Conference on Forest Products 2008 (NCFP 2008). Published by Forest Research Institute Malaysia (FRIM).
3. S. A. Bahari, M. A. Jamaludin, M. Ahmad, K. Nordin & M. J. Saad. (2008). Characterization on mechanical and physical behaviour of natural particle-based composite material made from gigantochloa scortechinii. Research Abstract. 2nd International Conference on Functional Materials and Devices 2008 (ICFMD 2008). Published by Faculty of Applied Sciences UiTM Malaysia and Institute of Materials Malaysia (IMM).
4. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi. (2008). Binderless bamboo fibreboard: a preliminary study. Research Abstract. Rattan and Bamboo Seminar 2008. Published by Forest Research Institute Malaysia (FRIM).
5. Shahril Anuar Bahari, Mohamad Jani Saad, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ikram Ariffin. (2008). Effects of different resin types and resin content levels on mechanical and physical properties of particleboard made from semantan bamboo (gigantochloa scortechinii). Research Abstract. Rattan and Bamboo Seminar 2008. Published by Forest Research Institute Malaysia (FRIM).
6. Shahril Anuar B., Mohd Ariff J., Mansur A., Kamarulzaman N. & Tony B. (2007). Mechanical properties of laminated bamboo strips lumber (lbsl) in comparison to solid rubberwood. Research Abstract. Conference on Forestry and Forest Products Research 2007(CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 82.
7. Shahril Anuar B., Mansur A., Mohd Ariff J., Mohamad Jani S., Kamarulzaman N. & Mohd Ikram A. (2007). Effect of resin content levels on mechanical and physical properties of single-layered bamboo particleboard. Research Abstract. Conference on Forestry and Forest Products Research 2007 (CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 82.
8. Mohd Ariff J., Kamarulzaman N., Shahril Anuar B. & Abdul Hamid S. (2007). Bending characteristics and stress concentration of laminated-veneer-lumber (lvl) from oil palm trunk (opt). Research Abstract. Conference on Forestry and Forest Products Research 2007(CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 43.
9. Shahril Anuar B., Mohd Nazip S., Mazlin K. & Suriana R. (2007). Study on non-timber products in sungkai forest, perak. Research Abstract. Seminar Biodiversiti Kebangsaan 2007. Published by Department of Wildlife and National Parks (PERHILITAN) Malaysia. Pp. 44.
10. Mohd Nazip S., Mazlin K., Shahril Anuar B., Suriana R., Sheikh Abdul Karim Y., Nurul Nadiah M. F. H. & Aishah B. (2007). A preliminary study of tree species composition in sungkai forest. Research Abstract. Seminar Biodiversiti Kebangsaan 2007. Published by Department of Wildlife and National Parks (PERHILITAN) Malaysia. Pp. 20.
11. S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin. (2007). Tensile mechanics of bamboo strips. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 101.
12. Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin. (2007). Analysis on strength behaviour of malaysian bamboo species. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 225.
13. Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh. (2007). The bending strength, internal bonding and thickness swelling of multilayer sandwiched bamboo particleboard. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 227.
14. Mohd Ariff Jamaludin, Kamarulzaman Nordin, Shahril Anuar Bahari & Mansur Ahmad. (2007). The effect of veneer layers on the bending shear strength and delamination of laminated veneer lumber (lvl) from oil palm trunk (opt). International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 113.
15. Shahril Anuar Bahari, Tony Boniface, Kamarulzaman Nordin, Mohd Ariff Jamaludin & Mohd Hafiz Musa. (2007). Analysis on springback percentage (sp) of bent laminated bamboo strips lumber (blbsl) using different pressing methods. Research Abstract. 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-03-3. Pp. 51.
16. Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa. (2007). Effect of high frequency pressing method (hfpm) on springback behaviour of bent laminated bamboo strips lumber (blbsl). Research Abstract. 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-03-3. Pp. 78.
17. Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin. (2006). Environmental friendly sandwich panel using bamboo skin wastes as core material. 5th Asian-Australasian Conference on Composite Materials (ACCM-5), 27-30 November 2006, Hong Kong.
18. Ahmad, M., Bahari, S. A. and Jamaludin, M. A. (2005). Failure modes and microscopic failures of bamboo strips (dendrocalamus asper) loaded in tension and compression. Research Abstract. The International Forestry Review. Vol. 7 (5). Forest in the Balance: Linking Tradition and Tradition. XXII IUFRO World Congress, 8 – 13 August 2005, Brisbane, Australia. Published by Commonwealth Forestry Association. ISSN 1465 5489. Pp. 144.
19. Nordin, K., Wahab, R., Jamaludin, M. A., Bahari, S. A. and Zakaria, M. N. (2005). Strength properties of glued-laminated bamboo strips for furniture. Research Abstract. The International Forestry Review. Vol. 7 (5). Forest in the Balance: Linking Tradition and Tradition. XXII IUFRO World Congress, 8 – 13 August 2005, Brisbane, Australia. Published by Commonwealth Forestry Association. ISSN 1465 5489. Pp. 128.
V. TECHNICAL REPORT
1. Shahril Anuar Bahari. (2008). Mechanical and physical behaviour of bamboo particleboard. Research Project Report. Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia.
2. N. Kamarulzaman, W. Razak, J. Mohd Ariff, B. Shahril Anuar & Z. Mohd Nazarudin. (2005). Strength properties of glued-laminated bamboo strips for furniture. Using wood composites as a tool for sustainable forestry. Gen. Tech. Rep. FPL-GTR-163. Madison, Wisconsin. U. S. Department of Agriculture, Forest Service, Forest Products Laboratory, USA. Pp. 83 – 85.
ACADEMIC ACTIVITIES
I. CONFERENCES / TALKS / FORUMS / DIALOGUES
Bamboo Forum: Material of the New Millennium
(Participant)
Forest Research Institute Malaysia (FRIM) and Malaysian Association of Creativity and Innovation (MACRI)
National Science Centre, Kuala Lumpur, Malaysia
18 April 2009
Talk on Products Commercialization
(Participant)
Malaysian Technology Development Centre (MTDC) and Faculty of Applied Sciences, UiTM Malaysia
8 April 2009
Annual Timber Research and Industry Briefing
(Speaker)
• Shahril Anuar Bahari
“Evaluation on Mechanical Strength Performance of Bamboo and Bamboo-Based Composite Products”
Malaysian Timber Industry Board (MTIB), University of Putra Malaysia (UPM) and UiTM
Seri Pacific Hotel, Kuala Lumpur, Malaysia
2 April 2009
Talk on Consultancy
(Participant)
Research Management Institute (RMI)
Annexe Hall, UiTM Malaysia
24 March 2009
Seminar on Glulam: Combining Beauty with Function
(Participant)
Malaysian Timber Council (MTC)
Forest Research Institute Malaysia (FRIM)
19 March 2009
9th Pacific Rim Bio-Based Composites Symposium
(Speaker)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Siti Aidaliza Subardi, Mohamad Jani Saad & Kamarulzaman Nordin
“Characterization on Bending Strength of Binderless Bamboo Fibreboard (BBF)”
CSIRO and SCION
Hotel Novotel, Rotorua, New Zealand
5 – 8 November 2008
National Conference on Forest Products (NCFP) 2008.
(Speaker)
· Shahril Anuar Bahari, Tengku Maliana Ku Yusof, Judith Gisip & Mohd Ariff Jamaludin
“Characterization on strength behaviour of single-layer particleboard from leucaena leucocephala”
(Poster Presenter)
· Judith Gisip, Shahril Anuar Bahari, Ridzuan Samsury & Akmal Mohamed Isa
“Petai belalang composite panel board as a potential material for furniture components”
Forest Research Institute Malaysia (FRIM) and UiTM
Legend Hotel, Kuala Lumpur, Malaysia
29 – 31 October 2008
Presentation on Fundamental Research Grant Scheme
(Speaker)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad
“Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction”
Ministry of Higher Education Malaysia
Putrajaya International Convention Centre (PICC), Putrajaya, Malaysia
17 July 2008
Presentation on Innovation in Construction
(Speaker)
· Shahril Anuar Bahari
“Binderless Bamboo Fibre-Based Composite for Indoor Construction Material”
Construction Industry Development Board Malaysia (CIDB), Kuala Lumpur, Malaysia
25 June 2008
2nd International Conference on Functional Materials and Devices (ICFMD) 2008
(Speaker)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad & Kamarulzaman Nordin
“Characterization on Mechanical and Physical Behaviour of Natural Particle-Based Composite Material made from Gigantochloa scortechinii”
Faculty of Applied Sciences UiTM and Institute of Materials Malaysia (IMM)
Berjaya Time Square Hotel and Convention Centre, Kuala Lumpur, Malaysia
17 – 19 June 2008
Timber Talk Series: Glue-Laminated Timber in Structural Applications
(Participant)
Malaysian Timber Council (MTC)
One Utama, Kuala Lumpur, Malaysia
13 May 2008
Rattan and Bamboo Seminar 2008
(Poster Presenter)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi
“Binderless Bamboo Fibreboard: A Preliminary Study”
· Shahril Anuar Bahari, Mohamad Jani Saad, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ikram Ariffin
“Effects of Different Resin Types and Resin Content Levels on Mechanical and Physical Properties of Particleboard Made From Semantan Bamboo (Gigantochloa Scortechinii)”
Forest Research Institute of Malaysia (FRIM)
Seri Pacific Hotel, Kuala Lumpur, Malaysia
25 – 26 March 2008
Dialogue with Director General, Ministry of Higher Education (MOHE) Malaysia
(Participant)
Institute of Research, Development and Commercialization (IRDC) UiTM
Concorde Hotel, Shah Alam, Malaysia
19 January 2008
Conference on Forestry and Forest Products Research (CFFPR) 2007
(Poster Presenter)
· Shahril Anuar B., Mohd Ariff J., Mansur A., Kamarulzaman N. & Tony B. “Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) in Comparison to Solid Rubberwood”
· Shahril Anuar B., Mansur A., Mohd Ariff J., Mohamad Jani S., Kamarulzaman N. & Mohd Ikram A.
“Effect of Resin Content Levels on Mechanical and Physical Properties of Single-Layered Bamboo Particleboard”
· Mohd Ariff J., Kamarulzaman N., Shahril Anuar B. & Abdul Hamid S.
“Bending Characteristics and Stress Concentration of Laminated-Veneer-Lumber (LVL) from Oil Palm Trunk (OPT)”
Forest Research Institute of Malaysia (FRIM)
Legend Hotel, Kuala Lumpur, Malaysia
27 – 29 November 2007
Seminar Biodiversiti Kebangsaan 2007
(Poster Presenter)
· Shahril Anuar B., Mohd Nazip S., Mazlin K. & Suriana R.
“Study on non-timber products in sungkai forest, perak”
· Mohd Nazip S., Mazlin K., Shahril Anuar B., Suriana R., Sheikh Abdul Karim Y., Nurul Nadiah M. F. H. & Aishah B.
“A Preliminary Study of Tree Species Composition in Sungkai Forest”
Department of Wildlife and National Parks (PERHILITAN) Malaysia
Allson Klana Resort, Seremban, Malaysia
20 – 21 November 2007
Talk on “Fire Resistance of Bio-Composite Materials” by Dr Abdul Rashid Ab Malik from Forest Research Institute Malaysia (FRIM)
(Organizer)
Seminar Room, Institute of Sciences (IOS), UiTM Malaysia Shah Alam, Malaysia
24 September 2007
International Conference on Advancement of Materials and Nanotechnology (ICAMN) 2007
(Speaker and Poster Presenter)
· S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin
“Tensile Mechanics of Bamboo Strips”
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
“Analysis on Strength Behaviour of Malaysian Bamboo Species”
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh
“The Bending Strength, Internal Bonding and Thickness Swelling of Multilayer Sandwiched Bamboo Particleboard”
· Mohd Ariff Jamaludin, Kamarulzaman Nordin, Shahril Anuar Bahari & Mansur Ahmad
“The Effect of Veneer Layers on the Bending Shear Strength and Delamination of Laminated Veneer Lumber (LVL) from Oil Palm Trunk (OPT)”
Institute of Science UiTM and Advance Material Research Centre, SIRIM Bhd
City Bayview Hotel, Langkawi, Malaysia
29 May – 1 June 2007
3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007)
(Poster Presenter)
· Shahril Anuar Bahari, Tony Boniface, Kamarulzaman Nordin, Mohd Ariff Jamaludin, & Mohd Hafiz Musa
“Analysis of Springback Percentage (Sp) of Bent Laminated Bamboo Strips Lumber (BLBSL) Using Different Pressing Methods”
· Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa
“Effect of High Frequency Pressing Method (HFPM) on Springback Behaviour of Bent Laminated Bamboo Strips Lumber (BLBSL)”
(Won Best Poster Presentation Award)
School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM)
Vistana Hotel, Penang, Malaysia
10 – 11 April 2007
Launching of “Tim-bor” and Talks on “The Use of Tim-bor Treated Wood for Sustainable Construction in Malaysia”
(Participant)
Nufarm Technologies (M) Sdn Bhd
Eastin Hotel, Petaling Jaya, Malaysia
15 March 2007
Timber Talk Series: Bio-Deterioration of Wood
(Participant)
Malaysian Timber Council (MTC)
PGRM Tower, Kuala Lumpur, Malaysia
13 February 2007
Seminar on International Standards and Technical Requirements
(Participant)
Malaysian Timber Council (MTC)
Park Royal Hotel, Kuala Lumpur Malaysia
8 January 2007
Forum on Specifying American Hardwood for Furniture Manufacturing
(Participant)
Malaysian Furniture Promotional Council (MFPC)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
15 December 2006
Forum on University-Industry Linkage for Excellence in Human Capital Development
(Participant)
UiTM-Industry Linkage Centre (UiLC) UiTM
Annex Hall, UiTM Malaysia
14 December 2006
Symposium on 8th Pacific Rim Bio-Based Composites
(Participant)
Forest Research Institute of Malaysia (FRIM)
Legend Hotel, Kuala Lumpur, Malaysia
20 – 23 November 2006
Symposium on Trends in Postgraduate Studies: International Perspectives and Practices
(Participant)
Institute of Graduate Study (IGS) UiTM
Concorde Hotel, Shah Alam, Malaysia
10 November 2006
Seminar on “How To Succeed in Research”
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
21 September 2006
Timber Talk Series: Seminar on Wood Preservation
(Participant)
Malaysian Timber Council (MTC)
Renaissance Hotel, Kuala Lumpur, Malaysia
7 September 2006
Seminar on Corrosions
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
20 July 2006
A Dialogue Among Public Institutes of Higher Learning Offering Programs in Wood-Based Industries
(Participant)
Malaysian Timber Council (MTC)
PGRM Tower, Kuala Lumpur, Malaysia
27 June 2006
Conference on Applied Sciences (CAS) 2006
(Speaker and Chairperson)
· S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin
“Failure Behaviour of Betong Bamboo Strips Loaded in Shear”
· S. A. Bahari, K. Nordin, R. Wahab, M. Ahmad & M. A. Jamaludin
“Compression Strength Properties of Laminated Bamboo Lumber (LBL) for Small Construction Applications”
Faculty of Applied Sciences, UiTM
Hyatt Regency Saujana Hotel, Subang, Malaysia
13 – 14 June 2006
Timber Talk Series: “A Common Sense Approach to Specifying Timbers”
(Participant)
Malaysian Timber Council (MTC)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
9 May 2006
NIOSH Seminar: Safety in Laboratory
(Chairperson)
Faculty of Applied Sciences, UiTM Malaysia
13 April 2006
Talk/Promotion of Bio-Composite Technology Program/Furniture Technology
(Speaker)
UiTM Perlis, Arau, Malaysia
2 March 2006
Timber Talk Series: Understanding The Nature of Wood
(Participant)
Malaysian Timber Council
PGRM Tower, Kuala Lumpur, Malaysia
28 February 2006
Talk/Promotion of Bio-Composite Technology Program/Furniture Technology
(Speaker)
Kedah Matriculation Colleague, Changlun, Malaysia
24 February2006
Seminar and Launching of National Timber Industry Policies (NATIP)
(Participant)
Malaysian Timber Industry Board (MTIB)
PGRM Tower, Kuala Lumpur, Malaysia
24 November 2005
Seminar on Press Technology for Wood-Based Products
(Secretariat)
Faculty of Applied Sciences, UiTM Malaysia
29 – 30 August 2005
XXII IUFRO 2005 World Congress
(Poster Presenter)
· Kamarulzaman Nordin, Razak Wahab, Mohd Ariff Jamaludin, Shahril Anuar Bahari & Mohd Nzarudin Zakaria
“Strength Properties of Glued-Laminated Bamboo Strips for Furniture”
· Mansur Ahmad, Shahril Anuar Bahari & Mohd Ariff Jamaludin
“Failure Modes and Microscopic Failures of Bamboo Strips (Dendrocalamus asper) Loaded in Tension and Compression”
International Union of Forest Research Organizations (IUFRO)
Brisbane, Australia
8 – 13 August 2005
National Seminar on Science Technology and Social Science (STSS) 2004
(Speaker)
· Bahari, S. A., Ahmad M. & Jamaludin, M. A.
“Microscopic Failure of Dendrocalamus asper (Buluh Betong) Loaded in Tension”
UiTM Pahang
Vistana Hotel, Kuantan, Malaysia
31 May – 1 June 2004
Conference on Scientific and Social Science Research (CSSR) 2004
(Speaker)
· Shahril Anuar Bahari & Mansur Ahmad
“Failure Modes and Strength Behaviour of Dendrocalamus asper (Buluh Betong) Loaded in Tension”
Institute of Research, Development and Commercialization (IRDC) UiTM
Crown Palza Riverside Hotel, Kuching, Malaysia
19 – 21 May 2004
USM-JIRCAS Joint international Symposium 2004 (Lignocelluloses: Materials for the Future from the Tropics)
(Poster Presenter)
· Bahari, S. A. & Ahmad M.
“Modes of Failure and Strength Properties of Dendrocalamus asper (Buluh Betong) Loaded in Tension”
Universiti Sains Malaysia
19 – 21 March 2004
Seminar and Workshop on Solid State Ionic and Devices
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
12 – 14 August 2003
II. COURSES / WORKSHOPS / TRAININGS
Course on PhD Research Methodology
(Participant)
Institute of Leadership and Quality Management (iLQaM), UiTM Malaysia
Quality Hotel, Shah Alam, Malaysia
13 – 17 April 2009
Workshop on Fundamental Research Grant Scheme (FRGS) Proposal Preparation
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
10 April 2009
Workshop on Vice Chancellor Excellence Award (AKNC) 2009
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
23 – 24 March 2009
Workshop on Outcome Based Education
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
29 – 30 January
Course on Efficiency’s Level Evaluation
(Participant)
Institute of Leadership and Quality Management (iLQaM), UiTM Malaysia
18 – 24 December 2008
Intellectual Property Course
(Participant)
Intellectual Property Corporation Malaysia (MyIPO) and Centre for University-Industry Linkage (UiLC), UiTM Malaysia
Seri Pacific Hotel, Kuala Lumpur, Malaysia
(18 – 20 August 2008)
Intellectual Property Course
(Participant)
Intellectual Property Corporation Malaysia (MyIPO) and Centre for University-Industry Linkage (UiLC), UiTM Malaysia
Hotel Palace of Golden Horses, Sri Kembangan, Malaysia
(29 – 31 July 2008)
Outcome-Based Education (OBE) Workshop for Bio-Composite Technology ND Furniture Technology
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
2 – 4 June 2008
Workshop on Science and Technology New Area Development Planning
(Vice-Secretary)
Centre for Strategic Planning, UiTM Malaysia
Intekma Resort & Convention Centre, Shah Alam, Malaysia
26 May 2008
Workshop on Book Writing
(Participant)
Faculty of Applied Sciences and University Publication Centre (UPENA), UiTM Malaysia
UiTM Hotel, Shah Alam, Malaysia
28 – 29 February 2008
Outcome-Based Education (OBE) Workshop
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
17 – 18 December 2007
Internal Audit Course
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
10 – 14 December 2007
Practicum Course (BCT 400): Biomass Camp
(Assigned Lecturer)
B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia
Bako National Park, Sarawak, Malaysia
6 – 9 December 2007
Induction Course
(Participant)
UiTM Training Centre, Kg Gajah, Perak, Malaysia
19 November – 4 December 2007
Workshop on Examination Questions Preparation
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
2 July 2007
Workshop on Malaysian Science and Technology Information
(Participant)
Ministry of Science, Technology and Innovation Malaysia
Crown Princess Hotel, Kuala Lumpur, Malaysia
21 June 2007
Evaluation on “Fundamental Research Grant Scheme (FRGS)”
(Technical Evaluator Panel)
Institute of Research, Development and Commercialization (IRDC) UiTM
Carlton Holiday Hotel, Shah Alam, Malaysia
8 March 2007
Workshop on FSG 2007’s Laboratory Manual Manuscript Final Preparation
(Participant)
Faculty of Applied Sciences, UiTM
Intekma Resort & Convention Centre, Shah Alam, Malaysia
9 – 10 February 2007
Workshop on Exam Questions Preparation for Bio-Composite Technology & Furniture Technology Program
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
31 January 2007
Workshop on FSG 2007’s Laboratory Manual Manuscript Preparation
(Participant)
Faculty of Applied Sciences, UiTM
Intekma Resort & Convention Centre, Shah Alam, Malaysia
4 – 5 January 2007
Workshop on Research Proposal Preparation via e-Science Fund
(Participant)
Institute of Leadership and Quality Management (iLQaM), UiTM Malaysia
26 – 27 December 2006
Practicum Course (BCT 400): Biomass Camp
(Assigned Lecturer)
B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia
National Park, Pahang, Malaysia
28 November – 5 December 2006
Course on Factory Management in Wood Industry
(Participant)
Malaysian Timber Industry Board (MTIB)
PGRM Tower, Kuala Lumpur, Malaysia
14 – 16 November 2006
Workshop on UiTM-PERHILITAN Long Term Research: Biodiversity in Taman Negara, Pahang
(Secretariat)
Institute of Research, Development and Commercialization (IRDC) UiTM
Old Chancellery Hall, UiTM Shah Alam, Malaysia
19 September 2006
Workshop on Exam Questions Preparation
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
14 – 15 August 2006
Course on New Material Development with Entrepreneurs (Composite Material-Plastic Glass Fibre)
(Participant)
Furniture Industry Technology Center (FITEC), Kuala Lumpur, Malaysia
30 July – 4 August 2006
Technology Enabled Classroom (TEC) Course
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
1 June 2006
Course on Teaching Basics (KAP)
(Participant)
Institute of Leadership and Quality Management (iLQaM), UiTM Malaysia
17 – 25 May 2006
Training on I-Learning
(Participant)
Centre for Integrated Information System (PSMB), UiTM Malaysia
14 April 2006
Workshop on Faculty of Applied Sciences’ Long-Term Research Projects
(Participant)
Faculty of Applied Sciences, UiTM
Guoman Hotel, Port Dickson, Malaysia
16 – 18 February 2006
Workshop on Exam Questions Preparation for Bio-Composite Technology & Furniture Technology Program
(Participant)
Faculty of Applied Sciences, UiTM Malaysia, Shah Alam, Malaysia
2 – 3 February 2006
Pre-Workshop on Long-Term Research Proposal for Furniture Technology Program
(Participant)
Furniture Technology Program, UiTM
Intekma Resort, UiTM Malaysia, Shah Alam, Malaysia
29 November 2005
Image Analyzer Training
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
14 – 15 March 2005
Workshop on Exam Questions Preparation for Bio-Composite Technology & Furniture Technology Program
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
26 – 27 June 2006
III. VISITS
Academic Visit to EURO Furniture Bhd
(Secretariat)
EURO Furniture Bhd, Rawang
10 April 2006
Academic Visit to Malayan Adhesives and Chemicals (M) Sdn Bhd
(Secretariat)
Shah Alam, Malaysia
25 March 2009
Industrial Visit Course (BCT500): Visit to Bio-Composite Factory
(Secretariat)
Perak, Penang, Kedah and Perlis, Malaysia
1 – 5 December 2008
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Puncak Bumi Utama Sdn Bhd, Simpang Ampat, Malaysia
Embo Wood Sdn Bhd, Kulim, Malaysia
28 June 2008
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Lembaga Kemajuan Wilayah Kedah (KEDA), Alor Star, Malaysia
Steady Furniture Sdn. Bhd. Jitra, Malaysia
Dongwha Fiberboard Bhd, Merbok, Malaysia
8 – 9 June 2008
Familiarization Program for Lecturers: Visit to Wood-Based Factory in Selangor, Perak and Negeri Sembilan, Malaysia
(Participant)
Malaysian Timber Council (MTC)
20 – 23 May 2008
Academic Visit to Mechanical Engineering Laboratory for Furniture Manufacturing II (FUR453) Course
(Secretariat)
Faculty of Mechanical Engineering, UiTM Shah Alam, Malaysia
10 April 2008
Academic Visits to TS High Tech Seat Sdn Bhd
(Secretariat)
Klang, Malaysia
10 March 2008
Industrial Visit Course (BCT500): Visit to Wood-Based Factory and Johor National Park
(Secretariat)
Negeri Sembilan and Johor, Malaysia
12 – 15 November 2007
Academic Visit to Malaysian Palm Oil Board (MPOB)
(Secretariat)
Bangi, Malaysia
1 October 2007
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
THL Sofa Sdn Bhd, Ipoh, Malaysia
22 May 2007
Academic Visit to Gunung Seraya Wood Products Sdn Bhd
(Secretariat)
Gunung Seraya Wood Products Sdn Bhd, Port Klang, Malaysia
16 April 2007
Academic Visit to Ferco Seating Sdn Bhd
(Secretariat)
Ferco Seating Sdn Bhd, Shah Alam, Malaysia
16 April 2007
Academic Visit to Mechanical Engineering Laboratory for Furniture Manufacturing II (FUR453) Course
(Secretariat)
Faculty of Mechanical Engineering, UiTM Shah Alam, Malaysia
22 March 2007
Visit to Jengka Forest
(Participant)
Jengka Forest, Jengka, Malaysia
16 – 18 March 2007
Visit to Bamboo Plantation
(Researcher)
Felda Mempaga, Bentong, Malaysia
11 February 2007
Visit to Kenaf Plantation
(Assigned Lecturer)
Malaysian Agricultural Research and Development Institute (MARDI), Serdang, Malaysia
8 February 2007
Academic Visit to Homelife Furniture
(Secretariat)
Homelife Furniture, Puchong, Malaysia
5 October 2006
Academic Visit to Dongwha Fiberboard Bhd
(Secretariat)
Dongwha Fiberboard Bhd, Nilai, Malaysia
5 October 2006
Academic Visit to Wood Composite and Chemistry Laboratory for Physical and Chemical Properties of Cellulosic Materials (BCT465) Course
(Secretariat)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
27 September 2006
Academic Visit to Furniture Testing Laboratory (FTL) for Furniture Strength and Testing (FUR505) Course
(Secretariat)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
13 September 2006
Academic Visit to Bamboo, Timber Latex Clone and Acacia Hybrid Plantation
(Secretariat)
Golden Hope Bradwall Estate, Seliau, Malaysia
8 September 2006
Visit and Preparation of Agricultural Waste Samples (Rice Husks)
(Secretariat)
Beras Nasional (BERNAS), Tanjung Karang, Malaysia
5 September 2006
Visit and Preparation of Oil Palm Residue Samples
(Secretariat)
Malaysian Palm Oil Board (MPOB), Bangi and Oil Palm Sawmill, Labu, Malaysia
24 August 2006
Visit and Preparation of Kenaf Samples
(Secretariat)
Malaysian Agricultural Research and Development Institute (MARDI), Serdang, Malaysia
22 August 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
DPM Sdn Bhd, Batu Caves, Malaysia
22 Jun 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Yusia Jaya Sdn Bhd, Tanjung Karang, Malaysia
21 June 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Malaysian Palm Oil Board (MPOB), Bangi, Malaysia
20 June 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Elite Display Sdn Bhd, Batu Caves, Malaysia
19 June 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Wood Industry Skills Development Center (WISDEC), Banting, Malaysia
16 June 2006
Academic Visit to EURO Furniture Bhd
(Secretariat)
EURO Furniture Bhd, Rawang
10 April 2006
Academic Visit to MINHO (M) Sdn Bhd
(Secretariat)
MINHO (M) Sdn Bhd, Kapar, Malaysia
10 April 2006
Academic Visit to Furniture Testing Laboratory (FTL) for Furniture Strength and Testing Course (FUR505)
(Secretariat)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
23 March 2006
Academic Visit to Furniture Testing Laboratory (FTL) for Furniture Strength and Testing Course (FUR505)
(Secretariat)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
21 September 2005
IV. EXHIBITIONS & COMPETITIONS
Inventions, Innovations and Designs (IID) 2009 Competition
(Inventor)
• Shahril Anuar Bahari, Mohd Ariff Jamaludin, Judith Gisip, Mohd Safuan Nadzin, Nurul Nadiah Mohd Firdaus Hum & Sitiarfah Abu Bakar
“Agroboard”
(Won Bronze Medal Award)
• Judith Gisip, Suhaili Mohamad & Shahril Anuar Bahari
“Portabelle”
(Won Bronze Medal Award)
• Rosmas Sarnua, Mohd Nazip Suratman & Shahril Anuar Bahari
“Nangka Board: Product Diversification from Agriculture”
(Won Silver Medal Award)
Research Management Institute (RMI), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
13 – 15 January 2009
Exhibition on Academic Programs and Research Products: National Conference on Forest Products (NCFP) 2008
(Secretariat)
Forest Research Institute Malaysia (FRIM) AND UiTM Malaysia
Hotel Legend, Kuala Lumpur, Malaysia
29 – 31 October 2008
19th International Invention, Innovation and Technology Exhibition (ITEX) 2008
(Inventor)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohamad Jani Saad
“Binderless Bamboo Fibre-Based Composite for Indoor Construction Material”
(Won Bronze Medal Award)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
9 – 10 May 2008
36th International Exhibition of Inventions, New Techniques and Products 2008
(Inventor)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohamad Jani Saad
“Bio-Composite Panel Board Made From Bamboo Particle”
(Won Gold Medal Award)
Swiss Federal Government
Geneva Palexpo, Geneva, Switzerland
2 – 6 April 2008
11th Moscow International Salon of Industrial Property “Archimedes” 2008
(Inventor)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad
“Particleboard Made From Bamboo Skin Wastes”
(Won Ecology-Friendly Award from Internationa Ecology Fund)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
“Five Layer Sandwiched Bamboo Particleboard”
(Won Bronze Medal Award, Ecology-Friendly Award from International Ecology Fund, Iran Special Award: Diploma of Honour and Honour Certificate Federal Service for Intellectual Property, Patent & Trademark)
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
Inventions, Innovations and Designs (IID) 2008 Exhibition and Competition
(Inventor)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi
“Bimboard”
(Won Gold Medal Award)
· Shahril Anuar Bahari, Azizi Abd Jalil & Mohd Rozemy Mohamad Ghazali
‘Bamper”
(Won Silver Medal Award)
· Shahril Anuar Bahari, Mohd Nazarudin Zakaria, Mohd Ariff Jamaludin, Mansur Ahmad & Kamarulzaman Nordin
“Bamboo Scaffolding”
(Won Bronze Medal Award)
· Kamarulzaman Nordin, Othman Sulaiman, Mohd Ariff Jamaludin & Shahril Anuar Bahari
“Microwave Treated Bamboo – Novel Approach towards Enhancing the Strength Properties of Gigantochloa scortechinii (Semantan) Bamboo”
(Won Bronze Medal Award)
· Judith Gisip, Shahril Anuar Bahari, Akmal Mohamed Isa & Mohamad Ridzuan Samsury
“Lightweight Furniture from Petai Belalang”
(Won Bronze Medal Award)
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
Malaysia Technology Expo (MTE) 2008
(Inventor)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Hafiz Musa & Mashitah Abu Kassim
“Moulded Laminated Bamboo Lumber for Furniture Components”
(Won Bronze Medal Award)
Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia
21 – 23 February 2008
International Exposition of Research and Inventions of Institutions of Higher Learning (PECIPTA) 2007
(Inventor)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Mashitah Abu Kassim
“Moulded Laminated Bamboo Lumber for Furniture Components”
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
10 – 12 August 2007
Science and Technology Exhibition (S & T) 2007: Bio-Composite Technology
(Students’ Coordinator)
Faculty of Applied Sciences
Sri Budiman Hall, UiTM Malaysia
1 – 2 August 2007
Malaysia International Commodity Conference and Showcase (MICCOS) 2007
(Exhibitor)
Ministry of Plantation Industries and Commodities Malaysia
Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia
3 – 8 July 2007
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
(Inventor)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohd Ikram Ariffin
“Bio-Composite Panel Board Made From Bamboo Particles”
(Won Silver Medal Award)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin, & Mohd Ariff Jamaludin
“Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load”
(Won Bronze Medal Award)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin, & Mohd Ariff Jamaludin
“Bending Strength Properties of Bamboo Strips”
(Won Bronze Medal Award)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
“Five Layer Sandwiched Bamboo Particleboard”
(Won Silver Medal Award)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mansur Ahmad & Mohd Ariff Jamaludin
“Particleboard Made From Bamboo Skin Wastes”
(Won Silver Medal Award)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
Malaysia Technology Expo (MTE) 2007
(Inventor)
· Kamarulzaman Nordin & Shahril Anuar Bahari
“Eezy-Picture Frame”
Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia
29 – 31 March 2007
Inventions, Innovations and Designs (IID) 2007 Exhibition and Competition
(Inventor)
· Kamarulzaman Nordin & Shahril Anuar Bahari
“Eezy-Picture Frame”
(Won Gold Medal Award)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Mashitah Abu Kassim
“Moulded Laminated Bamboo Lumber for Furniture Components”
(Won Silver Medal Award)
· Shahril Anuar Bahari, Mohd Ikram Ariffin, Mansur Ahmad & Kamarulzaman Nordin
“Potential of Bamboo as an Alternative Raw Material through Production of Bio-Composite Panel Board for Interior Construction Uses”
(Won Bronze Medal Award)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
“Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load”
(Won Bronze Medal Award)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
“Effect of Culm Height Levels and Node Presence on Maximum Bending Stress of Semantan Bamboo (Gigantochloa Scortechinii) Strips”
(Won Bronze Medal Award)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mansur Ahmad & Mohd Ariff Jamaludin
“Particleboard Made From Bamboo Skin Wastes”
(Won Bronze Medal Award)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh
“Five Layer Sandwiched Bamboo Particleboard”
(Won Bronze Medal Award)
Institute of Research, Development and Commercialization (IRDC) UiTM
Sri Budiman Hall (DSB), UiTM Shah Alam, Malaysia
24 – 25 January 2007
The British Invention Show 2006
(Inventor)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
“Environmental-Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
(Won Gold Medal Award)
Alexandra Palace, London, UK
18 – 21 October 2006
Mini Exhibition: Bio-Composite and Furniture Technology Program Promotion (Secretariat)
Faculty of Applied Sciences, UiTM Malaysia
4 – 6 & 11 – 13 September 2006
Independent Day Festival (FESKEM) Exhibition and Sale- Furniture and Bio-Composite Products
(Students’ Advisor)
Padang Kawad, UiTM Shah Alam, Malaysia
25 – 31 August 2006
Science & Technology Exhibition: Bio-Furniture Theme
(Students’ Advisor)
Annex Hall, UiTM Shah Alam, Malaysia
15 – 16 July 2006
17th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2006 Exhibition and Competition
(Inventor)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
“Environmental-Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
(Won Silver Medal Award)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
19 – 21 May 2006
Program Exhibition and Promotion for Hari Bertemu Pelanggan UiTM
(Exhibitor)
Sri Budiman Hall (DSB), UiTM Shah Alam, Malaysia
11 – 12 March 2006
Education Carnival Exhibition (Bio-Composite and Furniture Technology Program Promotion)
(Exhibitor)
Kedah Matriculation Colleague, Changlun, Malaysia
25 – 26 February 2006
Exhibition of Interflour-UiTM-Commercialization and Research Centre
(Exhibitor)
Innovation Centre, UiTM Shah Alam, Malaysia
22 February 2006
Agricultural-Based Industry Expo (EIAT)-FAMA 2006
(Exhibitor)
Malaysian Agricultural Research and Development Institute (MARDI)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
19 February 2006
Inventions, Innovations and Designs (IID) 2006 Exhibition and Competition
(Inventor)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
“Failure Properties of Betong Bamboo Strips Loaded in Bending”
(Won Bronze Medal Award)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
“Environmental-Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
(Won Silver Medal Award)
Institute of Research, Development and Commercialization (IRDC) UiTM
Sri Budiman Hall (DSB), UiTM Shah Alam, Malaysia
19 – 20 January 2006
Exhibition on Wood-Based and Bio-Composite Products for Opening Ceremony of Rimba Bandar Bukit Bauk, Dungun, Malaysia
(Exhibitor)
Rimba Bandar Bukit Bauk, Dungun, Malaysia
7 August 2005
Exhibition of Wood-Based and Bio-Composite Products for Workshop on Multidisciplinary and Collaborative Research Opportunities in Applied Sciences (Exhibitor)
Faculty of Applied Sciences, UiTM Malaysia
28 July 2005
16th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2005 Exhibition and Competition
(Inventor)
· Kamarulzaman Nordin, Zainal Ripin, Mohd Ariff Jamaludin, Mansur Ahmad, Shahril Anuar Bahari & Mohd Nazarudin Zakaria
“New Concept Modular Console Table”
(Won Bronze Medal Award)
Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia
19 – 21 May 2005
Asia Pacific Natural Products Expo (NATPRO) 2005
(Exhibitor)
· Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad, Shahril Anuar Bahari & Mohd Nazarudin Zakaria
“Laminated Bamboo Strips-Floor I-Joist (LBS-FIJ)
Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia
14 – 16 April 2005
Institute of Graduate Study (IGS) Information Day
(Exhibitor)
Institute of Graduate Study (IGS) UiTM
Annex Hall, UiTM Shah Alam, Malaysia
20 January 2005
NON-ACADEMIC ACTIVITIES
Bio-Composite Technology Dinner and Sports Day
(Participant)
Bougainvilla, Port Dickson, Malaysia
28 – 29 March 2009
Malaysian Timber Council’s Annual Dinner 2008
(Participant)
Hilton Hotel, Kuala Lumpur, Malaysia
17 July 2008
Furniture Technology Pre-Graduation Night
(Participant)
Golden Strait Villa, Port Dickson, Malaysia
22 March 2008
Majlis Berbuka Puasa (Bio-Composite Technology Program)
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
28 September 2007
Counselling Talk for Bio-Composite Technology Students
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
15 April 2007
Sports Day: Super Sunday
(Participant)
Sports Arena, UiTM Malaysia
1 April 2007
Kayaking With Bio-Composite Technology Students
(Participant)
Shah Alam Lake Garden, Shah Alam, Malaysia
23 September 2006
Bio-Composite Barbeque Party
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
23 September 2006
Furniture Technology Pre-Graduation Dinner
(Participant)
Quality Hotel, Shah Alam, Malaysia
15 September 2006
Furniture Technology Pre-Graduation Dinner
(Participant)
Grand Blue Wave Hotel, Shah Alam, Malaysia
8 April 2006
PROFESSIONAL MEMBERSHIPS
Member
Malaysian Association of Creativity and Innovation (MACRI)
April 2009 - Present
Member
Society of Wood Science and Technology
February 2009 – Present
Member
Forest Products Society
February 2009 – Present
Lecturer
Address:
Bio-Composite Technology Program,
Faculty of Applied Sciences,
University of Technology MARA (UiTM) Malaysia,
40450 Shah Alam,
Selangor Darul Ehsan, Malaysia
Telephone:
603-55444625 (Office)
6019-3884618 (Mobile)
Facsimile:
603-55444562
E-Mail Address:
shahril721@salam.uitm.edu.my
sabahari_77@yahoo.com
“Composing Nature in Life”
PERSONAL PARTICULARS
Full Name : Shahril Anuar Bin Bahari
Date of Birth : 13 June 1977
Place of Birth : Tapah, Perak, Malaysia
Nationality : Malaysian
Race : Malay
Religion : Islam
Gender : Male
Marital Status : Married
AREA OF SPECIALIZATION
Composite Mechanics & Physics
Research Interests:
-Mechanical Strength and Physical Performance of Engineered Composite and Bio-Composite
Materials
-Mechanical Strength and Physical Performance of Bamboo and
Bamboo-Based Composite Materials
-Development of Binderless Board Products
-Conversion of Agro-Industrial Wastes into Value
Added Products
EDUCATIONAL BACKGROUND
M. Sc. (Wood Science and Technology), 2005
University of Technology MARA (UiTM) Malaysia
Thesis: Modes of Failure and Microscopic Failures of
Betong Bamboo Strips Loaded in Shear, Bending, Tension
and Compression
B. Sc. (Furniture Technology), 2002
University of Technology MARA (UiTM) Malaysia
Thesis: Strength Properties of Laminated Gigantochloa
scortechinii (Semantan Bamboo)
Diploma (Mechanical Engineering), 1999
University of Technology MARA (UiTM) Malaysia
Final Year Project: Survey on Cumulative Trauma
Disorder (CTD) Among Typists in UiTM: Relationship
between Bio-Mechanics and Office Furniture Workstation
Design
WORKING EXPERIENCE
November 2005 – Present
Lecturer
Faculty of Applied Sciences
University of Technology MARA (UiTM) Malaysia
August – December 2005
Part-Time Research Assistant
Institute of Tropical Biocomposite (INTROB)
University of Putra Malaysia (UPM) Malaysia
July 2004 – November 2005
Research Assistant
Research Management Institute (RMI)
University of Technology MARA (UiTM) Malaysia
June 2003 – September 2004
Part-Time Tuition Teacher
Mercu Kecemerlangan Tuition Centre and Malkhah
Tuition Centre
Shah Alam, Malaysia
July – September 2001
Practical Trainee
Guthrie Furniture Sdn. Bhd.
Shah Alam, Malaysia
TEACHING EXPERIENCE
I. Lectures and Laboratories
A. B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Bio-Composite Technology II (BCT597), Lecture and Laboratory
2. Bio-Composite Technology I (BCT567), Lecture and Laboratory
3. Structure and Identification of Cellulosic Materials (BCT441), Lecture and Laboratory
4. Static and Strength of Materials (BCT421), Laboratory
5. Physical and Chemical Properties of Cellulosic Materials (BCT465), LaboratoryB.
B. Sc. (Hons.) in Material Technology, Faculty of Applied Sciences, UiTM Malaysia
Strength of Materials (PST541), Laboratory
C. B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Furniture Strength and Testing (FUR505), Lecture and Laboratory
2. Wood Composite (FUR265), Lecture
3. Furniture Manufacturing II (FUR453), Lecture and Laboratory
II. Thesis Supervision
A. As Chairman / Major Advisor
B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Mohd Syahrizul Chik, Investigation on Heat and Friction Resistance of Automotive Brake Pad Composed with Coconut Husk Dust
2. Nurul Ain Noor Rahman, Investigation on Heat and Friction Resistance of Automotive Brake Pad Composed with Rice Husk Dust
3. Muhammad Rahimi Ramli, Investigation on Hardness and Impact Properties of Automotive Brake Pad Composed with Coconut Husk Dust
4. Khairul Hafizee Isa, Investigation on Hardness and Impact Properties of Automotive Brake Pad Composed with Rice Husk Dust
5. Kamrie Kamlon, Performance of Recycled Polymer Composite Reinforced with Different Percentage of Rice Husk Flour
6. Mohd. Faizal Izwan Salihuddin, Performance of Recycled Polymer Composite Reinforced with Different Percentage of Coconut Shell Flour
7. Muhamad Yunus Abd Hamid, Effects of Different Resin Types and Environmental Exposures on Compression Perpendicular Loading of Bolted Joint Laminated Bamboo Strips Lumber
8. Muhammad Najmuddin Hashim, Effects of Different Resin Types and Environmental Exposures on Compression Parallel Loading of Bolted Joint Laminated Bamboo Strips Lumber
9. Wan Nor Raihan Wan Jaafar, Influence of High Frequency Heating and Layer Orientation on Mechanical and Physical Properties of Multi Laminar Bio-Composite Board
10. Balkis Fatomer A Bakar, Effects of Resin Content Levels and Environmental Exposures on Mechanical Strength and Physical Performance of High Density Agricultural Wastes Particleboard
11. Nurul Alyaa Abdul Malek, Effects of Resin Content Levels and Environmental Exposures on Mechanical Strength and Physical Performance of High Density Bamboo Particle Composite Board
12. Saeid Mubarak Jamalullain, Bending Strength and Electrical Resistance of Polymer Composite Reinforced With Coconut Husk Particle
13. Mohd Khairi Yahya, Bending Strength and Electrical Resistance of Polymer Composite Reinforced With Pineapple Leaves Particle
14. Sitiarfah Abu Bakar, Mechanical Strength Evaluation on Agro-board for Lightweight Interior Construction
15. Mohd Safuan Nadzin, Analysis on Mechanical and Physical Properties of Bagasse Board for Building Components
B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Siti Aidaliza Subardi, Mechanical Properties of Binderless Bamboo Fibreboard (BBF)
2. Tengku Maliana Ku Yusof, Effects of Different Resin Types and Resin Content Levels on Strength Properties of Particleboard Made from Petai Belalang (Leucaena leucocephala)
3. Hafizah Samsudin, Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction
4. Mohd Ikram Ariffin, Effects of Different Resin Types and Resin Content Levels on Mechanical and Physical Properties of Particleboard Made from Semantan Bamboo (Gigantochloa scortechinii)
5. Mohd Hafiz Musa, Effect of Different Pressing Methods and Pressing Times on Springback Properties of Bent Laminated Bamboo Strips Lumber (bLBSL) for Furniture Component
B. As Co-Advisor
B. Sc. (Hons.) in Environmental Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Suzana Ibrahim, Influence of Different Treatment and Beating Processes on Strength Properties of Paper from Sugarcane Waste
2. Siti Suraya Daud, Strength Properties of Paper from Coconut Husks at Different Ages and Fibre Sizes
B. Sc. (Hons.) in Textile Technology, Faculty of Applied Sciences, UiTM Malaysia
Munirah Anuar, Mechanical Properties of Agricultural Waste Composite Board Reinforced with Textile Fabrics
B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia
1. Akmal Mohamed Isa, Physical and Mechanical Properties of Solid Petai Belalang (Leucaena leucocephala)
2. Noor Azrieda Abd Rashid, A Study on Botanical Characters and Anatomical Features of Kenaf (Hibiscus cannabinus l.) as Future Bio-Composite Material
3. Nur Hannani Abdul Latif, Surface Roughness Evaluation of Bamboo Furniture Components Using Stylus Contact Method
4. Mohd Esmael Ariff Osman Wahid, Effects of Surface Roughness of Laminated Bamboo Furniture Components on Glueline Performance
5. Nur Afida Mohd Rafik, Effects of High Frequency Heating on the Bonding Performance of Laminated Bamboo
RESEARCH EXPERIENCE
1. Physical and Mechanical Strength Characterization of Hybrid Composite Material from Fabric-Reinforced Agricultural Waste Particles
Mohd Iqbal Misnon (Project Leader) & Shahril Anuar Bahari
UiTM’s Excellence Fund
November 2008 – Present
2. Evaluation on Mechanical and Physical Properties of Particle-Based Composite Panel Board Made From Agro-Industrial Waste Materials
Shahril Anuar Bahari Project Leader), Mansur Ahmad & Mohd Ariff Jamaludin
UiTM’s Excellence Fund
May 2008 – Present
3. The Analysis of Forest Tree Diseases in Relation to Vegetative Characteristics at Kuala Keniam, Taman Negara, Pahang, Malaysia
Mansur Ahmad (Project Leader), Mohd Nazip Suratman, Shahril Anuar Bahari & Suriana Rofie@Rafie
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
May 2007 – Present
4. Tree Species Diversity of Kuala Keniam, Taman Negara, Pahang, Malaysia
Mohd Nazip Suratman (Project Leader), Mazlin Kusin, Mansur Ahmad, Shahril Anuar Bahari, Judith Gisip, Suriana Rofie@Rafie & Azrena Abdul Karim
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
May 2007 – Present
5. Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction
Project Code: 600-IRDC/ST/FRGS5/3/1145)
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin & Mansur Ahmad
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006 – Present
6. Strength and Performance Properties of Environmental-Friendly Sandwich Panel Using Binderless Bamboo Medium Density Fiberboard (bBMDF) as Core Material
(Project Code: 600-IRDC/ST/FRGS.5/3/1156)
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Azrena Abdul Karim
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006 – Present
7. Utilization of Pioneer Forest Species in the Production of Environmental-Friendly Inorganic Bonded Bio-Composite Panels
Razali Abdul Kader (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Shahril Anuar Bahari
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006 – Present
8. Mechanical and Physical Behaviour of Bamboo Particleboard
Shahril Anuar Bahari
Institute of Research, Development and Commercialization (IRDC), UiTM
June 2006 – June 2008
9. Design and Development of Structural Composite Lumber Using Malaysian Bamboo Species
Mansur Ahmad (Project Leader), Mohd Ariff Jamaludin, Kamarulzaman Nordin & Mohd Tamizi Mustafa
Shahril Anuar Bahari (Research Assistant)
Intensification of Research in Priority Areas (IRPA)
Ministry of Science, Technology and Innovation Malaysia
July 2004 – November 2005
10. Modes of Failure and Microscopic Failures of Malaysian Bamboo Species
Mansur Ahmad (Project Leader/Advisor), Kamarulzaman Nordin & Roslan Ali
Shahril Anuar Bahari (M. Sc. Student)
Ministry of Science, Technology and Innovation Malaysia
Institute of Research, Development and Commercialization (IRDC), UiTM
December 2001 – June 2005
11. Strength Properties of Laminated Gigantochloa scortechinii (Buluh Semantan)
Kamarulzaman Nordin (Project Leader/Advisor)
Shahril Anuar Bahari (B. Sc. Student)
Faculty of Applied Sciences, UiTM Malaysia
December 2000 – October 2001
EXTENSION SERVICES
1. Vice-Secretary
The Committee of Science and Technology New Area Development
Centre for Strategic Planning, UiTM Malaysia
May 2008 – Present
2. Internal Auditor
Faculty of Applied Sciences, UiTM Malaysia
February 2008 – Present
3. Evaluator Panel
Science and Mathematic Publication Award
University Publication Centre (UPENA), UiTM Malaysia
January 2008
4. Member
The Committee of Technical Paper & Exhibition
National Conference on Forest Products 2008
Forest Research Institute Malaysia (FRIM) and UiTM Malaysia
August 2007 – October 2008
5. Member
The Committee of Vice Chancellor Excellent Award (AKNC)
Faculty of Applied Sciences, UiTM Malaysia
July 2007 – Present
6. Member
Examination Committee
Faculty of Applied Sciences, UiTM Malaysia
March 2007 – Present
7. Technical Evaluator Panel
Fundamental Research Grant Scheme (FRGS)
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
March 2007
8. Member
Program Development Committee
Master of Science in Agro-Industrial Forestry (M. Sc. by Coursework)
Faculty of Applied Sciences, UiTM Malaysia
September 2006 – Present
9. Students Academic Advisor
B. Sc. (Hons.) in Bio-Composite Technology
Faculty of Applied Sciences, UiTM Malaysia
July 2006 – Present
10. Students Academic Advisor
B. Sc. (Hons.) in Furniture Technology
Faculty of Applied Sciences, UiTM Malaysia
January – April 2006
11. Member
Program Revision Committee
B. Sc. (Hons.) in Furniture Technology
Faculty of Applied Sciences, UiTM Malaysia
January 2006 – Present
12. Member/Facilitator
Students’ Leadership & Development Training Module
Students Affair Department and Faculty of Applied Sciences, UiTM Malaysia
December 2005 – July 2007
13. Member/Part-Time Student
Academic Division
Certificate
Received the certificates in 2005 and 2006:
· Certificate in Islamic Study: Syariah Islamiah, 2006
· Certificate in Islamic Study: Pengantar Fiqh, 2005
Sultan Salahuddin Abdul Aziz Shah Mosque, Shah Alam, Malaysia
December 2004 – Present
CONSULTANCY EXPERIENCE
Bio-Diversity Inventory: Documentation on Timber and Non-Wood Forest Products in Sungkai Forest, Malaysia
Mohd Nazip Suratman (Leader), Mazlin Kusin, Shahril Anuar Bahari & Suriana Rofie@Rafie
Department of Wildlife and National Parks (PERHILITAN) Malaysia
February 2007
AWARDS & RECOGNITIONS
1.Bronze Medal Award
“Agroboard”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Judith Gisip, Mohd Safuan Nadzin, Nurul Nadiah Mohd Firdaus Hum & Sitiarfah Abu Bakar
Invention, Innovation and Design (IID) 2009
Research Management Institute (RMI), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
13 – 15 January 2009
2.Bronze Medal Award
“Portabelle”
Judith Gisip (Project Leader), Suhaili Mohamad & Shahril Anuar Bahari
Invention, Innovation and Design (IID) 2009
Research Management Institute (RMI), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
13 – 15 January 2009
3.Silver Medal Award
“Nangka Board: Product Diversification from Agriculture”
Rosmas Sarnua, Mohd Nazip Suratman & Shahril Anuar Bahari
Invention, Innovation and Design (IID) 2009
Research Management Institute (RMI), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
13 – 15 January 2009
4. Research Project Grant Award (RM 30,000.00)
“Evaluation on Mechanical and Physical Properties of Particle-Based Composite Panel Board Made From Agro-Industrial Waste Materials”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad & Mohd Ariff Jamaludin
UiTM’s Excellence Fund
May 2008
5. Bronze Medal Award (Materials Category)
“Binderless Bamboo Fibre-Based Composite for Indoor Construction Material”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohamad Jani Saad
19th International Invention, Innovation and Technology Exhibition (ITEX) 2008
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
9 – 10 May 2008
6. Gold Medal Award (Building and Construction Materials Category)
“Bio-Composite Panel Board Made From Bamboo Particle”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohamad Jani Saad
36th International Exhibition of Inventions, New Techniques and Products 2008
Swiss Federal Government
Geneva Palexpo, Geneva, Switzerland
2 – 6 April 2008
7. Ecology-Friendly Award from International Ecology Fund
“Particleboard Made From Bamboo Skin Waste”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
8. Bronze Medal Award
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
9. Ecology-Friendly Award from International Ecology Fund
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
10. Iran Special Award: Diploma of Honour
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
11. Property, Patent & Trademark
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
11th Moscow International Salon of Industrial Property “Archimedes” 2008
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
12. Gold Medal Award (Invention Category)
“Bimboard”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
13. Silver Medal Award (Invention Category)
“Bamper”
Shahril Anuar Bahari (Project Leader), Azizi Abd Jalil & Mohd Rozemy Mohamad Ghazali
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
14. Bronze Medal Award (Invention Category)
“Bamboo Scaffolding”
Shahril Anuar Bahari (Project Leader), Mohd Nazarudin Zakaria, Mohd Ariff Jamaludin, Mansur Ahmad & Kamarulzaman Nordin
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
15. Bronze Medal Award (Innovation Category)
“Microwave Treated Bamboo – Novel Approach towards Enhancing the Strength Properties of Gigantochloa scortechinii (Semantan) Bamboo”
Kamarulzaman Nordin (Project Leader), Othman Sulaiman, Mohd Ariff Jamaludin & Shahril Anuar Bahari
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
16. Bronze Medal Award (Invention Category)
“Lightweight Furniture from Petai Belalang Timber”
Judith Gisip (Project Leader), Shahril Anuar Bahari, Akmal Mohamed Isa & Mohamad Ridzuan Samsury
Inventions, Innovations and Designs (IID) 2008
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
17. Bronze Medal Award
“Moulded Laminated Bamboo Lumber for Furniture Components”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Hafiz Musa & Mashitah Abu Kassim
Malaysia Technology Expo (MTE) 2008
Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia
21 – 23 February 2008
18. Silver Medal Award
“Bio-Composite Panel Board Made From Bamboo Particles”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohd Ikram Ariffin
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
19. Bronze Medal Award
“Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
20. Bronze Medal Award
“Bending Strength Properties of Bamboo Strips”
Shahril Anuar Bahari(Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
21. Silver Medal Award
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
22. Silver Medal Award
“Particleboard Made From Bamboo Skin Wastes”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
23. Best Poster Presentation Award
“Effect of High Frequency Pressing Method (HFPM) on Springback Behaviour of Bent Laminated Bamboo Strips Lumber (BLBSL)”
Shahril Anuar Bahari (Project Leader), Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa
3rd Colloquium on Materials, Minerals and Polymers (MAMIP) 2007
School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM)
Vistana Hotel, Penang, Malaysia
10 – 11 April 2007
24. Gold Medal Award (Invention Category)
“Eezy-Picture Frame”
Kamarulzaman Nordin &(Project Leader), Shahril Anuar Bahari
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM, Shah Alam, Malaysia
24 – 25 January 2007
25. Silver Medal Award (Invention Category)
“Moulded Laminated Bamboo Lumber for Furniture Components”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin & Mashitah Abu Kassim
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM, Shah Alam, Malaysia
24 – 25 January 2007
26. Bronze Medal Award (Invention Category)
“Potential of Bamboo as an Alternative Raw Material through Production of Bio-Composite Panel Board for Interior Construction Uses”
Shahril Anuar Bahari (Project Leader), Mohd Ikram Ariffin, Mansur Ahmad & Kamarulzaman Nordin
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
27. Bronze Medal Award (Innovation Category)
“Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
28. Bronze Medal Award (Innovation Category)
“Effect of Culm Height Levels and Node Presence on Maximum Bending Stress of Semantan Bamboo (Gigantochloa Scortechinii) Strips”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
29. Bronze Medal Award (Invention Category)
“Particleboard Made From Bamboo Skin Wastes”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mansur Ahmad & Mohd Ariff Jamaludin
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
30. Bronze Medal Award (Invention Category)
“Five Layer Sandwiched Bamboo Particleboard”
Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh
Inventions, Innovations and Designs (IID) 2007
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
24 – 25 January 2007
31. Research Project Grant Award (RM 31,000.00)
“Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin & Mansur Ahmad
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006
32. Research Project Grant Award (RM 8,000.00)
“Strength and Performance Properties of Environmental-Friendly Sandwich Panel Using Binderless Bamboo Medium Density Fiberboard (bBMDF) as Core Material”
Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Azrena Abdul Karim
Fundamental Research Grant Scheme (FRGS)
Ministry of Higher Education Malaysia
October 2006
33. Gold Medal Award
“Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
The British Invention Show 2006
Alexandra Palace, London, UK
18 – 21 October 2006
34. Silver Medal Award
“Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
17th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2006
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
19 – 21 May 2006
35. Silver Medal Award (Invention Category)
“Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
Inventions, Innovations and Designs (IID) 2006
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
19 – 20 January 2006
36. Bronze Medal Award (Innovation Category)
“Failure Properties of Betong Bamboo Strips Loaded in Bending”
Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin Inventions, Innovations and Designs (IID) 2006
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
19 – 20 January 2006
37. Bronze Medal Award
“New Concept Modular Console Table”
Kamarulzaman Nordin (Project Leader), Zainal Ripin, Mohd Ariff Jamaludin, Mansur Ahmad, Shahril Anuar Bahari & Mohd Nazarudin Zakaria
IPTA Research and Development Exhibition 2005
Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia
19 – 21 May 2005
LIST OF PUBLICATIONS
I. BOOK
Judith Gisip, Shahril Anuar Bahari, Kamarulzaman Nordin & Azrena Abdul Karim. (2007). Laboratory manual on experiments of anatomical, physical and mechanical properties of wood. Published by University Publication Centre (UPENA), Universiti Teknologi MARA (UiTM). ISBN 978 983 3644 830.
II. JOURNALS
1. Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin. Tensile mechanics of bamboo strips. American Institute of Physics. In review.
2. Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin. Analysis on strength behaviour of malaysian bamboo species. American Institute of Physics. In review.
3. Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh. The bending strength, internal bonding and thickness swelling of multilayer sandwiched bamboo particleboard. American Institute of Physics. In review.
4. Mohd Ariff Jamaludin, Kamarulzaman Nordin, Shahril Anuar Bahari & Mansur Ahmad. The effect of veneer layers on the bending shear strength and delamination of laminated veneer lumber (lvl) from oil palm trunk (opt). American Institute of Physics. In review.
5. Shahril Anuar Bahari & Mansur Ahmad. Effect of culm height levels and node presence on mechanical properties and fracture modes of gigantochloa scortechinii strips loaded in shear parallel to grain. Bamboo Science and Culture. The Journal of American Bamboo Society, USA. In review.
6. Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin. (2007). Environmental friendly sandwich panel using bamboo skin wastes as core material. Journal of Key Engineering Materials. Vol. 334 – 335. Advances in Composite Materials and Structures. Trans Tech Publication, Switzerland. ISBN-13 978-087849-427-9. Pp. 41 – 44.
III. PROCEEDINGS
1. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Siti Aidaliza Subardi, Mohamad Jani Saad & Kamarulzaman Nordin. (2008). Characterization on bending strength of binderless bamboo fibreboard (bbf). Proceeding of 9th Pacific Rim Bio-Based Composites Symposium 2008. Published by Australia’s Commonwealth Scientific and Industrial Research Organisation (CSIRO) and Scion New Zealand. Pp. 238 – 246.
2. Mohd Ariff Jamaludin, Shahril Anuar Bahari & Kamarulzaman Nordin. (2008). Sandwiched bagasse particleboard as a lightweight material for the furniture and building construction industries. Proceeding of 9th Pacific Rim Bio-Based Composites Symposium 2008. Published by Australia’s Commonwealth Scientific and Industrial Research Organisation (CSIRO) and Scion New Zealand. Pp. 203 – 207.
3. Shahril Anuar Bahari, Mansur Ahmad, Mohd Ariff Jamaludin, Kamarulzaman Nordin & Mohd Ikram Ariffin. (2007). Potential of bamboo as an alternative raw material through production of bio-composite panelboard for light weight interior construction uses. Proceeding of International Panel Products Symposium 2007 (IPPS 2007). Published by The Biocomposite Centre, Bangor University, United Kingdom. ISBN 978-1-84220-097-1. Pp. 319 – 326.
4. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Hafizah Samsudin. (2007). Laminated bamboo strip lumber (lbsl). Proceeding of International Panel Products Symposium 2007 (IPPS 2007). Published by The Biocomposite Centre, Bangor University, United Kingdom. ISBN 978-1-84220-097-1. Pp. 327 – 332.
5. Shahril Anuar Bahari, Tony Boniface, Kamarulzaman Nordin, Mohd Ariff Jamaludin & Mohd Hafiz Musa. (2007). Analysis on springback percentage (sp) of bent laminated bamboo strips lumber (blbsl) using different pressing methods. Proceeding of the 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-04-0. Pp. 107 – 109.
6. Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa. (2007). Effect of high frequency pressing method (hfpm) on springback behaviour of bent laminated bamboo strips lumber (blbsl). Proceeding of the 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-04-0. Pp. 248 – 250.
7. S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin. (2006). Failure behaviour of betong bamboo strips loaded in shear. Findings of the Young Researchers on Applied Science 2006 (CAS 2006). Vol. 1, Physics and Material Science. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 983-3643-17-5. Pp. 173 – 179.
8. S. A. Bahari, K. Nordin, R. Wahab, M. Ahmad & M. A. Jamaludin. (2006). Compression strength properties of laminated bamboo lumber (lbl) for small construction applications. Findings of the Young Researchers on Applied Science 2006 (CAS 2006). Vol. 1, Physics and Material Science. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 983-3643-17-5. Pp. 247 – 249.
9. Bahari, S. A. & Ahmad, M. (2005). Modes of failure and strength properties of dendrocalamus asper (buluh betong) loaded in tension. Proceeding of 3rd USM-JIRCAS Japan Joint International Symposium: Lignocellulose; Materials for the Future from the Tropics. JIRCAS Working Report No. 39, Japan. ISSN 1341-710x. Pp. 277 - 280.
10. Bahari, S. A., Ahmad, M. & Jamaludin, M. A. (2004). Microscopic failure of dendrocalamus asper(buluh betong) loaded in tension. Proceeding of Seminar Kebangsaan Sains Teknologi dan Sains Sosial (STSS) 2004. Jilid 1: Sains Teknologi. ISBN 983-40671-6-x. Pp. 400 - 405.
11. Shahril Anuar Bahari & Mansur Ahmad. (2004). Failure modes and strength behaviour of dendrocalamus asper (buloh betong) loaded in tension. Conference on Scientific and Social Research (CSSR) 2004, Kuching, Sarawak. 19-21 May 2004.
IV. RESEARCH ABSTRACTS
1. Shahril Anuar Bahari, Tengku Maliana Ku Yusof, Judith Gisip & Mohd Ariff Jamaludin. (2008). Characterization on strength behaviour of single-layer particleboard from leucaena leucocephala. Research Abstract. National Conference on Forest Products 2008 (NCFP 2008). Published by Forest Research Institute Malaysia (FRIM).
2. Judith Gisip, Shahril Anuar Bahari, Ridzuan Samsury & Akmal Mohamed Isa. (2008). Petai belalang composite panel board as a potential material for furniture components. Research Abstract. National Conference on Forest Products 2008 (NCFP 2008). Published by Forest Research Institute Malaysia (FRIM).
3. S. A. Bahari, M. A. Jamaludin, M. Ahmad, K. Nordin & M. J. Saad. (2008). Characterization on mechanical and physical behaviour of natural particle-based composite material made from gigantochloa scortechinii. Research Abstract. 2nd International Conference on Functional Materials and Devices 2008 (ICFMD 2008). Published by Faculty of Applied Sciences UiTM Malaysia and Institute of Materials Malaysia (IMM).
4. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi. (2008). Binderless bamboo fibreboard: a preliminary study. Research Abstract. Rattan and Bamboo Seminar 2008. Published by Forest Research Institute Malaysia (FRIM).
5. Shahril Anuar Bahari, Mohamad Jani Saad, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ikram Ariffin. (2008). Effects of different resin types and resin content levels on mechanical and physical properties of particleboard made from semantan bamboo (gigantochloa scortechinii). Research Abstract. Rattan and Bamboo Seminar 2008. Published by Forest Research Institute Malaysia (FRIM).
6. Shahril Anuar B., Mohd Ariff J., Mansur A., Kamarulzaman N. & Tony B. (2007). Mechanical properties of laminated bamboo strips lumber (lbsl) in comparison to solid rubberwood. Research Abstract. Conference on Forestry and Forest Products Research 2007(CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 82.
7. Shahril Anuar B., Mansur A., Mohd Ariff J., Mohamad Jani S., Kamarulzaman N. & Mohd Ikram A. (2007). Effect of resin content levels on mechanical and physical properties of single-layered bamboo particleboard. Research Abstract. Conference on Forestry and Forest Products Research 2007 (CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 82.
8. Mohd Ariff J., Kamarulzaman N., Shahril Anuar B. & Abdul Hamid S. (2007). Bending characteristics and stress concentration of laminated-veneer-lumber (lvl) from oil palm trunk (opt). Research Abstract. Conference on Forestry and Forest Products Research 2007(CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 43.
9. Shahril Anuar B., Mohd Nazip S., Mazlin K. & Suriana R. (2007). Study on non-timber products in sungkai forest, perak. Research Abstract. Seminar Biodiversiti Kebangsaan 2007. Published by Department of Wildlife and National Parks (PERHILITAN) Malaysia. Pp. 44.
10. Mohd Nazip S., Mazlin K., Shahril Anuar B., Suriana R., Sheikh Abdul Karim Y., Nurul Nadiah M. F. H. & Aishah B. (2007). A preliminary study of tree species composition in sungkai forest. Research Abstract. Seminar Biodiversiti Kebangsaan 2007. Published by Department of Wildlife and National Parks (PERHILITAN) Malaysia. Pp. 20.
11. S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin. (2007). Tensile mechanics of bamboo strips. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 101.
12. Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin. (2007). Analysis on strength behaviour of malaysian bamboo species. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 225.
13. Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh. (2007). The bending strength, internal bonding and thickness swelling of multilayer sandwiched bamboo particleboard. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 227.
14. Mohd Ariff Jamaludin, Kamarulzaman Nordin, Shahril Anuar Bahari & Mansur Ahmad. (2007). The effect of veneer layers on the bending shear strength and delamination of laminated veneer lumber (lvl) from oil palm trunk (opt). International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 113.
15. Shahril Anuar Bahari, Tony Boniface, Kamarulzaman Nordin, Mohd Ariff Jamaludin & Mohd Hafiz Musa. (2007). Analysis on springback percentage (sp) of bent laminated bamboo strips lumber (blbsl) using different pressing methods. Research Abstract. 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-03-3. Pp. 51.
16. Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa. (2007). Effect of high frequency pressing method (hfpm) on springback behaviour of bent laminated bamboo strips lumber (blbsl). Research Abstract. 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-03-3. Pp. 78.
17. Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin. (2006). Environmental friendly sandwich panel using bamboo skin wastes as core material. 5th Asian-Australasian Conference on Composite Materials (ACCM-5), 27-30 November 2006, Hong Kong.
18. Ahmad, M., Bahari, S. A. and Jamaludin, M. A. (2005). Failure modes and microscopic failures of bamboo strips (dendrocalamus asper) loaded in tension and compression. Research Abstract. The International Forestry Review. Vol. 7 (5). Forest in the Balance: Linking Tradition and Tradition. XXII IUFRO World Congress, 8 – 13 August 2005, Brisbane, Australia. Published by Commonwealth Forestry Association. ISSN 1465 5489. Pp. 144.
19. Nordin, K., Wahab, R., Jamaludin, M. A., Bahari, S. A. and Zakaria, M. N. (2005). Strength properties of glued-laminated bamboo strips for furniture. Research Abstract. The International Forestry Review. Vol. 7 (5). Forest in the Balance: Linking Tradition and Tradition. XXII IUFRO World Congress, 8 – 13 August 2005, Brisbane, Australia. Published by Commonwealth Forestry Association. ISSN 1465 5489. Pp. 128.
V. TECHNICAL REPORT
1. Shahril Anuar Bahari. (2008). Mechanical and physical behaviour of bamboo particleboard. Research Project Report. Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia.
2. N. Kamarulzaman, W. Razak, J. Mohd Ariff, B. Shahril Anuar & Z. Mohd Nazarudin. (2005). Strength properties of glued-laminated bamboo strips for furniture. Using wood composites as a tool for sustainable forestry. Gen. Tech. Rep. FPL-GTR-163. Madison, Wisconsin. U. S. Department of Agriculture, Forest Service, Forest Products Laboratory, USA. Pp. 83 – 85.
ACADEMIC ACTIVITIES
I. CONFERENCES / TALKS / FORUMS / DIALOGUES
Bamboo Forum: Material of the New Millennium
(Participant)
Forest Research Institute Malaysia (FRIM) and Malaysian Association of Creativity and Innovation (MACRI)
National Science Centre, Kuala Lumpur, Malaysia
18 April 2009
Talk on Products Commercialization
(Participant)
Malaysian Technology Development Centre (MTDC) and Faculty of Applied Sciences, UiTM Malaysia
8 April 2009
Annual Timber Research and Industry Briefing
(Speaker)
• Shahril Anuar Bahari
“Evaluation on Mechanical Strength Performance of Bamboo and Bamboo-Based Composite Products”
Malaysian Timber Industry Board (MTIB), University of Putra Malaysia (UPM) and UiTM
Seri Pacific Hotel, Kuala Lumpur, Malaysia
2 April 2009
Talk on Consultancy
(Participant)
Research Management Institute (RMI)
Annexe Hall, UiTM Malaysia
24 March 2009
Seminar on Glulam: Combining Beauty with Function
(Participant)
Malaysian Timber Council (MTC)
Forest Research Institute Malaysia (FRIM)
19 March 2009
9th Pacific Rim Bio-Based Composites Symposium
(Speaker)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Siti Aidaliza Subardi, Mohamad Jani Saad & Kamarulzaman Nordin
“Characterization on Bending Strength of Binderless Bamboo Fibreboard (BBF)”
CSIRO and SCION
Hotel Novotel, Rotorua, New Zealand
5 – 8 November 2008
National Conference on Forest Products (NCFP) 2008.
(Speaker)
· Shahril Anuar Bahari, Tengku Maliana Ku Yusof, Judith Gisip & Mohd Ariff Jamaludin
“Characterization on strength behaviour of single-layer particleboard from leucaena leucocephala”
(Poster Presenter)
· Judith Gisip, Shahril Anuar Bahari, Ridzuan Samsury & Akmal Mohamed Isa
“Petai belalang composite panel board as a potential material for furniture components”
Forest Research Institute Malaysia (FRIM) and UiTM
Legend Hotel, Kuala Lumpur, Malaysia
29 – 31 October 2008
Presentation on Fundamental Research Grant Scheme
(Speaker)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad
“Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction”
Ministry of Higher Education Malaysia
Putrajaya International Convention Centre (PICC), Putrajaya, Malaysia
17 July 2008
Presentation on Innovation in Construction
(Speaker)
· Shahril Anuar Bahari
“Binderless Bamboo Fibre-Based Composite for Indoor Construction Material”
Construction Industry Development Board Malaysia (CIDB), Kuala Lumpur, Malaysia
25 June 2008
2nd International Conference on Functional Materials and Devices (ICFMD) 2008
(Speaker)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad & Kamarulzaman Nordin
“Characterization on Mechanical and Physical Behaviour of Natural Particle-Based Composite Material made from Gigantochloa scortechinii”
Faculty of Applied Sciences UiTM and Institute of Materials Malaysia (IMM)
Berjaya Time Square Hotel and Convention Centre, Kuala Lumpur, Malaysia
17 – 19 June 2008
Timber Talk Series: Glue-Laminated Timber in Structural Applications
(Participant)
Malaysian Timber Council (MTC)
One Utama, Kuala Lumpur, Malaysia
13 May 2008
Rattan and Bamboo Seminar 2008
(Poster Presenter)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi
“Binderless Bamboo Fibreboard: A Preliminary Study”
· Shahril Anuar Bahari, Mohamad Jani Saad, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ikram Ariffin
“Effects of Different Resin Types and Resin Content Levels on Mechanical and Physical Properties of Particleboard Made From Semantan Bamboo (Gigantochloa Scortechinii)”
Forest Research Institute of Malaysia (FRIM)
Seri Pacific Hotel, Kuala Lumpur, Malaysia
25 – 26 March 2008
Dialogue with Director General, Ministry of Higher Education (MOHE) Malaysia
(Participant)
Institute of Research, Development and Commercialization (IRDC) UiTM
Concorde Hotel, Shah Alam, Malaysia
19 January 2008
Conference on Forestry and Forest Products Research (CFFPR) 2007
(Poster Presenter)
· Shahril Anuar B., Mohd Ariff J., Mansur A., Kamarulzaman N. & Tony B. “Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) in Comparison to Solid Rubberwood”
· Shahril Anuar B., Mansur A., Mohd Ariff J., Mohamad Jani S., Kamarulzaman N. & Mohd Ikram A.
“Effect of Resin Content Levels on Mechanical and Physical Properties of Single-Layered Bamboo Particleboard”
· Mohd Ariff J., Kamarulzaman N., Shahril Anuar B. & Abdul Hamid S.
“Bending Characteristics and Stress Concentration of Laminated-Veneer-Lumber (LVL) from Oil Palm Trunk (OPT)”
Forest Research Institute of Malaysia (FRIM)
Legend Hotel, Kuala Lumpur, Malaysia
27 – 29 November 2007
Seminar Biodiversiti Kebangsaan 2007
(Poster Presenter)
· Shahril Anuar B., Mohd Nazip S., Mazlin K. & Suriana R.
“Study on non-timber products in sungkai forest, perak”
· Mohd Nazip S., Mazlin K., Shahril Anuar B., Suriana R., Sheikh Abdul Karim Y., Nurul Nadiah M. F. H. & Aishah B.
“A Preliminary Study of Tree Species Composition in Sungkai Forest”
Department of Wildlife and National Parks (PERHILITAN) Malaysia
Allson Klana Resort, Seremban, Malaysia
20 – 21 November 2007
Talk on “Fire Resistance of Bio-Composite Materials” by Dr Abdul Rashid Ab Malik from Forest Research Institute Malaysia (FRIM)
(Organizer)
Seminar Room, Institute of Sciences (IOS), UiTM Malaysia Shah Alam, Malaysia
24 September 2007
International Conference on Advancement of Materials and Nanotechnology (ICAMN) 2007
(Speaker and Poster Presenter)
· S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin
“Tensile Mechanics of Bamboo Strips”
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
“Analysis on Strength Behaviour of Malaysian Bamboo Species”
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh
“The Bending Strength, Internal Bonding and Thickness Swelling of Multilayer Sandwiched Bamboo Particleboard”
· Mohd Ariff Jamaludin, Kamarulzaman Nordin, Shahril Anuar Bahari & Mansur Ahmad
“The Effect of Veneer Layers on the Bending Shear Strength and Delamination of Laminated Veneer Lumber (LVL) from Oil Palm Trunk (OPT)”
Institute of Science UiTM and Advance Material Research Centre, SIRIM Bhd
City Bayview Hotel, Langkawi, Malaysia
29 May – 1 June 2007
3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007)
(Poster Presenter)
· Shahril Anuar Bahari, Tony Boniface, Kamarulzaman Nordin, Mohd Ariff Jamaludin, & Mohd Hafiz Musa
“Analysis of Springback Percentage (Sp) of Bent Laminated Bamboo Strips Lumber (BLBSL) Using Different Pressing Methods”
· Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa
“Effect of High Frequency Pressing Method (HFPM) on Springback Behaviour of Bent Laminated Bamboo Strips Lumber (BLBSL)”
(Won Best Poster Presentation Award)
School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM)
Vistana Hotel, Penang, Malaysia
10 – 11 April 2007
Launching of “Tim-bor” and Talks on “The Use of Tim-bor Treated Wood for Sustainable Construction in Malaysia”
(Participant)
Nufarm Technologies (M) Sdn Bhd
Eastin Hotel, Petaling Jaya, Malaysia
15 March 2007
Timber Talk Series: Bio-Deterioration of Wood
(Participant)
Malaysian Timber Council (MTC)
PGRM Tower, Kuala Lumpur, Malaysia
13 February 2007
Seminar on International Standards and Technical Requirements
(Participant)
Malaysian Timber Council (MTC)
Park Royal Hotel, Kuala Lumpur Malaysia
8 January 2007
Forum on Specifying American Hardwood for Furniture Manufacturing
(Participant)
Malaysian Furniture Promotional Council (MFPC)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
15 December 2006
Forum on University-Industry Linkage for Excellence in Human Capital Development
(Participant)
UiTM-Industry Linkage Centre (UiLC) UiTM
Annex Hall, UiTM Malaysia
14 December 2006
Symposium on 8th Pacific Rim Bio-Based Composites
(Participant)
Forest Research Institute of Malaysia (FRIM)
Legend Hotel, Kuala Lumpur, Malaysia
20 – 23 November 2006
Symposium on Trends in Postgraduate Studies: International Perspectives and Practices
(Participant)
Institute of Graduate Study (IGS) UiTM
Concorde Hotel, Shah Alam, Malaysia
10 November 2006
Seminar on “How To Succeed in Research”
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
21 September 2006
Timber Talk Series: Seminar on Wood Preservation
(Participant)
Malaysian Timber Council (MTC)
Renaissance Hotel, Kuala Lumpur, Malaysia
7 September 2006
Seminar on Corrosions
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
20 July 2006
A Dialogue Among Public Institutes of Higher Learning Offering Programs in Wood-Based Industries
(Participant)
Malaysian Timber Council (MTC)
PGRM Tower, Kuala Lumpur, Malaysia
27 June 2006
Conference on Applied Sciences (CAS) 2006
(Speaker and Chairperson)
· S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin
“Failure Behaviour of Betong Bamboo Strips Loaded in Shear”
· S. A. Bahari, K. Nordin, R. Wahab, M. Ahmad & M. A. Jamaludin
“Compression Strength Properties of Laminated Bamboo Lumber (LBL) for Small Construction Applications”
Faculty of Applied Sciences, UiTM
Hyatt Regency Saujana Hotel, Subang, Malaysia
13 – 14 June 2006
Timber Talk Series: “A Common Sense Approach to Specifying Timbers”
(Participant)
Malaysian Timber Council (MTC)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
9 May 2006
NIOSH Seminar: Safety in Laboratory
(Chairperson)
Faculty of Applied Sciences, UiTM Malaysia
13 April 2006
Talk/Promotion of Bio-Composite Technology Program/Furniture Technology
(Speaker)
UiTM Perlis, Arau, Malaysia
2 March 2006
Timber Talk Series: Understanding The Nature of Wood
(Participant)
Malaysian Timber Council
PGRM Tower, Kuala Lumpur, Malaysia
28 February 2006
Talk/Promotion of Bio-Composite Technology Program/Furniture Technology
(Speaker)
Kedah Matriculation Colleague, Changlun, Malaysia
24 February2006
Seminar and Launching of National Timber Industry Policies (NATIP)
(Participant)
Malaysian Timber Industry Board (MTIB)
PGRM Tower, Kuala Lumpur, Malaysia
24 November 2005
Seminar on Press Technology for Wood-Based Products
(Secretariat)
Faculty of Applied Sciences, UiTM Malaysia
29 – 30 August 2005
XXII IUFRO 2005 World Congress
(Poster Presenter)
· Kamarulzaman Nordin, Razak Wahab, Mohd Ariff Jamaludin, Shahril Anuar Bahari & Mohd Nzarudin Zakaria
“Strength Properties of Glued-Laminated Bamboo Strips for Furniture”
· Mansur Ahmad, Shahril Anuar Bahari & Mohd Ariff Jamaludin
“Failure Modes and Microscopic Failures of Bamboo Strips (Dendrocalamus asper) Loaded in Tension and Compression”
International Union of Forest Research Organizations (IUFRO)
Brisbane, Australia
8 – 13 August 2005
National Seminar on Science Technology and Social Science (STSS) 2004
(Speaker)
· Bahari, S. A., Ahmad M. & Jamaludin, M. A.
“Microscopic Failure of Dendrocalamus asper (Buluh Betong) Loaded in Tension”
UiTM Pahang
Vistana Hotel, Kuantan, Malaysia
31 May – 1 June 2004
Conference on Scientific and Social Science Research (CSSR) 2004
(Speaker)
· Shahril Anuar Bahari & Mansur Ahmad
“Failure Modes and Strength Behaviour of Dendrocalamus asper (Buluh Betong) Loaded in Tension”
Institute of Research, Development and Commercialization (IRDC) UiTM
Crown Palza Riverside Hotel, Kuching, Malaysia
19 – 21 May 2004
USM-JIRCAS Joint international Symposium 2004 (Lignocelluloses: Materials for the Future from the Tropics)
(Poster Presenter)
· Bahari, S. A. & Ahmad M.
“Modes of Failure and Strength Properties of Dendrocalamus asper (Buluh Betong) Loaded in Tension”
Universiti Sains Malaysia
19 – 21 March 2004
Seminar and Workshop on Solid State Ionic and Devices
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
12 – 14 August 2003
II. COURSES / WORKSHOPS / TRAININGS
Course on PhD Research Methodology
(Participant)
Institute of Leadership and Quality Management (iLQaM), UiTM Malaysia
Quality Hotel, Shah Alam, Malaysia
13 – 17 April 2009
Workshop on Fundamental Research Grant Scheme (FRGS) Proposal Preparation
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
10 April 2009
Workshop on Vice Chancellor Excellence Award (AKNC) 2009
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
23 – 24 March 2009
Workshop on Outcome Based Education
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
29 – 30 January
Course on Efficiency’s Level Evaluation
(Participant)
Institute of Leadership and Quality Management (iLQaM), UiTM Malaysia
18 – 24 December 2008
Intellectual Property Course
(Participant)
Intellectual Property Corporation Malaysia (MyIPO) and Centre for University-Industry Linkage (UiLC), UiTM Malaysia
Seri Pacific Hotel, Kuala Lumpur, Malaysia
(18 – 20 August 2008)
Intellectual Property Course
(Participant)
Intellectual Property Corporation Malaysia (MyIPO) and Centre for University-Industry Linkage (UiLC), UiTM Malaysia
Hotel Palace of Golden Horses, Sri Kembangan, Malaysia
(29 – 31 July 2008)
Outcome-Based Education (OBE) Workshop for Bio-Composite Technology ND Furniture Technology
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
2 – 4 June 2008
Workshop on Science and Technology New Area Development Planning
(Vice-Secretary)
Centre for Strategic Planning, UiTM Malaysia
Intekma Resort & Convention Centre, Shah Alam, Malaysia
26 May 2008
Workshop on Book Writing
(Participant)
Faculty of Applied Sciences and University Publication Centre (UPENA), UiTM Malaysia
UiTM Hotel, Shah Alam, Malaysia
28 – 29 February 2008
Outcome-Based Education (OBE) Workshop
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
17 – 18 December 2007
Internal Audit Course
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
10 – 14 December 2007
Practicum Course (BCT 400): Biomass Camp
(Assigned Lecturer)
B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia
Bako National Park, Sarawak, Malaysia
6 – 9 December 2007
Induction Course
(Participant)
UiTM Training Centre, Kg Gajah, Perak, Malaysia
19 November – 4 December 2007
Workshop on Examination Questions Preparation
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
2 July 2007
Workshop on Malaysian Science and Technology Information
(Participant)
Ministry of Science, Technology and Innovation Malaysia
Crown Princess Hotel, Kuala Lumpur, Malaysia
21 June 2007
Evaluation on “Fundamental Research Grant Scheme (FRGS)”
(Technical Evaluator Panel)
Institute of Research, Development and Commercialization (IRDC) UiTM
Carlton Holiday Hotel, Shah Alam, Malaysia
8 March 2007
Workshop on FSG 2007’s Laboratory Manual Manuscript Final Preparation
(Participant)
Faculty of Applied Sciences, UiTM
Intekma Resort & Convention Centre, Shah Alam, Malaysia
9 – 10 February 2007
Workshop on Exam Questions Preparation for Bio-Composite Technology & Furniture Technology Program
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
31 January 2007
Workshop on FSG 2007’s Laboratory Manual Manuscript Preparation
(Participant)
Faculty of Applied Sciences, UiTM
Intekma Resort & Convention Centre, Shah Alam, Malaysia
4 – 5 January 2007
Workshop on Research Proposal Preparation via e-Science Fund
(Participant)
Institute of Leadership and Quality Management (iLQaM), UiTM Malaysia
26 – 27 December 2006
Practicum Course (BCT 400): Biomass Camp
(Assigned Lecturer)
B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia
National Park, Pahang, Malaysia
28 November – 5 December 2006
Course on Factory Management in Wood Industry
(Participant)
Malaysian Timber Industry Board (MTIB)
PGRM Tower, Kuala Lumpur, Malaysia
14 – 16 November 2006
Workshop on UiTM-PERHILITAN Long Term Research: Biodiversity in Taman Negara, Pahang
(Secretariat)
Institute of Research, Development and Commercialization (IRDC) UiTM
Old Chancellery Hall, UiTM Shah Alam, Malaysia
19 September 2006
Workshop on Exam Questions Preparation
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
14 – 15 August 2006
Course on New Material Development with Entrepreneurs (Composite Material-Plastic Glass Fibre)
(Participant)
Furniture Industry Technology Center (FITEC), Kuala Lumpur, Malaysia
30 July – 4 August 2006
Technology Enabled Classroom (TEC) Course
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
1 June 2006
Course on Teaching Basics (KAP)
(Participant)
Institute of Leadership and Quality Management (iLQaM), UiTM Malaysia
17 – 25 May 2006
Training on I-Learning
(Participant)
Centre for Integrated Information System (PSMB), UiTM Malaysia
14 April 2006
Workshop on Faculty of Applied Sciences’ Long-Term Research Projects
(Participant)
Faculty of Applied Sciences, UiTM
Guoman Hotel, Port Dickson, Malaysia
16 – 18 February 2006
Workshop on Exam Questions Preparation for Bio-Composite Technology & Furniture Technology Program
(Participant)
Faculty of Applied Sciences, UiTM Malaysia, Shah Alam, Malaysia
2 – 3 February 2006
Pre-Workshop on Long-Term Research Proposal for Furniture Technology Program
(Participant)
Furniture Technology Program, UiTM
Intekma Resort, UiTM Malaysia, Shah Alam, Malaysia
29 November 2005
Image Analyzer Training
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
14 – 15 March 2005
Workshop on Exam Questions Preparation for Bio-Composite Technology & Furniture Technology Program
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
26 – 27 June 2006
III. VISITS
Academic Visit to EURO Furniture Bhd
(Secretariat)
EURO Furniture Bhd, Rawang
10 April 2006
Academic Visit to Malayan Adhesives and Chemicals (M) Sdn Bhd
(Secretariat)
Shah Alam, Malaysia
25 March 2009
Industrial Visit Course (BCT500): Visit to Bio-Composite Factory
(Secretariat)
Perak, Penang, Kedah and Perlis, Malaysia
1 – 5 December 2008
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Puncak Bumi Utama Sdn Bhd, Simpang Ampat, Malaysia
Embo Wood Sdn Bhd, Kulim, Malaysia
28 June 2008
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Lembaga Kemajuan Wilayah Kedah (KEDA), Alor Star, Malaysia
Steady Furniture Sdn. Bhd. Jitra, Malaysia
Dongwha Fiberboard Bhd, Merbok, Malaysia
8 – 9 June 2008
Familiarization Program for Lecturers: Visit to Wood-Based Factory in Selangor, Perak and Negeri Sembilan, Malaysia
(Participant)
Malaysian Timber Council (MTC)
20 – 23 May 2008
Academic Visit to Mechanical Engineering Laboratory for Furniture Manufacturing II (FUR453) Course
(Secretariat)
Faculty of Mechanical Engineering, UiTM Shah Alam, Malaysia
10 April 2008
Academic Visits to TS High Tech Seat Sdn Bhd
(Secretariat)
Klang, Malaysia
10 March 2008
Industrial Visit Course (BCT500): Visit to Wood-Based Factory and Johor National Park
(Secretariat)
Negeri Sembilan and Johor, Malaysia
12 – 15 November 2007
Academic Visit to Malaysian Palm Oil Board (MPOB)
(Secretariat)
Bangi, Malaysia
1 October 2007
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
THL Sofa Sdn Bhd, Ipoh, Malaysia
22 May 2007
Academic Visit to Gunung Seraya Wood Products Sdn Bhd
(Secretariat)
Gunung Seraya Wood Products Sdn Bhd, Port Klang, Malaysia
16 April 2007
Academic Visit to Ferco Seating Sdn Bhd
(Secretariat)
Ferco Seating Sdn Bhd, Shah Alam, Malaysia
16 April 2007
Academic Visit to Mechanical Engineering Laboratory for Furniture Manufacturing II (FUR453) Course
(Secretariat)
Faculty of Mechanical Engineering, UiTM Shah Alam, Malaysia
22 March 2007
Visit to Jengka Forest
(Participant)
Jengka Forest, Jengka, Malaysia
16 – 18 March 2007
Visit to Bamboo Plantation
(Researcher)
Felda Mempaga, Bentong, Malaysia
11 February 2007
Visit to Kenaf Plantation
(Assigned Lecturer)
Malaysian Agricultural Research and Development Institute (MARDI), Serdang, Malaysia
8 February 2007
Academic Visit to Homelife Furniture
(Secretariat)
Homelife Furniture, Puchong, Malaysia
5 October 2006
Academic Visit to Dongwha Fiberboard Bhd
(Secretariat)
Dongwha Fiberboard Bhd, Nilai, Malaysia
5 October 2006
Academic Visit to Wood Composite and Chemistry Laboratory for Physical and Chemical Properties of Cellulosic Materials (BCT465) Course
(Secretariat)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
27 September 2006
Academic Visit to Furniture Testing Laboratory (FTL) for Furniture Strength and Testing (FUR505) Course
(Secretariat)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
13 September 2006
Academic Visit to Bamboo, Timber Latex Clone and Acacia Hybrid Plantation
(Secretariat)
Golden Hope Bradwall Estate, Seliau, Malaysia
8 September 2006
Visit and Preparation of Agricultural Waste Samples (Rice Husks)
(Secretariat)
Beras Nasional (BERNAS), Tanjung Karang, Malaysia
5 September 2006
Visit and Preparation of Oil Palm Residue Samples
(Secretariat)
Malaysian Palm Oil Board (MPOB), Bangi and Oil Palm Sawmill, Labu, Malaysia
24 August 2006
Visit and Preparation of Kenaf Samples
(Secretariat)
Malaysian Agricultural Research and Development Institute (MARDI), Serdang, Malaysia
22 August 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
DPM Sdn Bhd, Batu Caves, Malaysia
22 Jun 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Yusia Jaya Sdn Bhd, Tanjung Karang, Malaysia
21 June 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Malaysian Palm Oil Board (MPOB), Bangi, Malaysia
20 June 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Elite Display Sdn Bhd, Batu Caves, Malaysia
19 June 2006
Official Visit for Students’ Practical Training
(Assigned Lecturer/Advisor)
Wood Industry Skills Development Center (WISDEC), Banting, Malaysia
16 June 2006
Academic Visit to EURO Furniture Bhd
(Secretariat)
EURO Furniture Bhd, Rawang
10 April 2006
Academic Visit to MINHO (M) Sdn Bhd
(Secretariat)
MINHO (M) Sdn Bhd, Kapar, Malaysia
10 April 2006
Academic Visit to Furniture Testing Laboratory (FTL) for Furniture Strength and Testing Course (FUR505)
(Secretariat)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
23 March 2006
Academic Visit to Furniture Testing Laboratory (FTL) for Furniture Strength and Testing Course (FUR505)
(Secretariat)
Forest Research Institute Malaysia (FRIM), Kepong, Malaysia
21 September 2005
IV. EXHIBITIONS & COMPETITIONS
Inventions, Innovations and Designs (IID) 2009 Competition
(Inventor)
• Shahril Anuar Bahari, Mohd Ariff Jamaludin, Judith Gisip, Mohd Safuan Nadzin, Nurul Nadiah Mohd Firdaus Hum & Sitiarfah Abu Bakar
“Agroboard”
(Won Bronze Medal Award)
• Judith Gisip, Suhaili Mohamad & Shahril Anuar Bahari
“Portabelle”
(Won Bronze Medal Award)
• Rosmas Sarnua, Mohd Nazip Suratman & Shahril Anuar Bahari
“Nangka Board: Product Diversification from Agriculture”
(Won Silver Medal Award)
Research Management Institute (RMI), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
13 – 15 January 2009
Exhibition on Academic Programs and Research Products: National Conference on Forest Products (NCFP) 2008
(Secretariat)
Forest Research Institute Malaysia (FRIM) AND UiTM Malaysia
Hotel Legend, Kuala Lumpur, Malaysia
29 – 31 October 2008
19th International Invention, Innovation and Technology Exhibition (ITEX) 2008
(Inventor)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohamad Jani Saad
“Binderless Bamboo Fibre-Based Composite for Indoor Construction Material”
(Won Bronze Medal Award)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
9 – 10 May 2008
36th International Exhibition of Inventions, New Techniques and Products 2008
(Inventor)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohamad Jani Saad
“Bio-Composite Panel Board Made From Bamboo Particle”
(Won Gold Medal Award)
Swiss Federal Government
Geneva Palexpo, Geneva, Switzerland
2 – 6 April 2008
11th Moscow International Salon of Industrial Property “Archimedes” 2008
(Inventor)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad
“Particleboard Made From Bamboo Skin Wastes”
(Won Ecology-Friendly Award from Internationa Ecology Fund)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
“Five Layer Sandwiched Bamboo Particleboard”
(Won Bronze Medal Award, Ecology-Friendly Award from International Ecology Fund, Iran Special Award: Diploma of Honour and Honour Certificate Federal Service for Intellectual Property, Patent & Trademark)
Cultural-Exhibition Centre "Sokolniki", Moscow, Russia
1 – 4 April 2008
Inventions, Innovations and Designs (IID) 2008 Exhibition and Competition
(Inventor)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi
“Bimboard”
(Won Gold Medal Award)
· Shahril Anuar Bahari, Azizi Abd Jalil & Mohd Rozemy Mohamad Ghazali
‘Bamper”
(Won Silver Medal Award)
· Shahril Anuar Bahari, Mohd Nazarudin Zakaria, Mohd Ariff Jamaludin, Mansur Ahmad & Kamarulzaman Nordin
“Bamboo Scaffolding”
(Won Bronze Medal Award)
· Kamarulzaman Nordin, Othman Sulaiman, Mohd Ariff Jamaludin & Shahril Anuar Bahari
“Microwave Treated Bamboo – Novel Approach towards Enhancing the Strength Properties of Gigantochloa scortechinii (Semantan) Bamboo”
(Won Bronze Medal Award)
· Judith Gisip, Shahril Anuar Bahari, Akmal Mohamed Isa & Mohamad Ridzuan Samsury
“Lightweight Furniture from Petai Belalang”
(Won Bronze Medal Award)
Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia
Sri Budiman Hall, UiTM Malaysia
25 – 27 March 2008
Malaysia Technology Expo (MTE) 2008
(Inventor)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Hafiz Musa & Mashitah Abu Kassim
“Moulded Laminated Bamboo Lumber for Furniture Components”
(Won Bronze Medal Award)
Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia
21 – 23 February 2008
International Exposition of Research and Inventions of Institutions of Higher Learning (PECIPTA) 2007
(Inventor)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Mashitah Abu Kassim
“Moulded Laminated Bamboo Lumber for Furniture Components”
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
10 – 12 August 2007
Science and Technology Exhibition (S & T) 2007: Bio-Composite Technology
(Students’ Coordinator)
Faculty of Applied Sciences
Sri Budiman Hall, UiTM Malaysia
1 – 2 August 2007
Malaysia International Commodity Conference and Showcase (MICCOS) 2007
(Exhibitor)
Ministry of Plantation Industries and Commodities Malaysia
Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia
3 – 8 July 2007
18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007
(Inventor)
· Shahril Anuar Bahari, Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohd Ikram Ariffin
“Bio-Composite Panel Board Made From Bamboo Particles”
(Won Silver Medal Award)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin, & Mohd Ariff Jamaludin
“Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load”
(Won Bronze Medal Award)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin, & Mohd Ariff Jamaludin
“Bending Strength Properties of Bamboo Strips”
(Won Bronze Medal Award)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh
“Five Layer Sandwiched Bamboo Particleboard”
(Won Silver Medal Award)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mansur Ahmad & Mohd Ariff Jamaludin
“Particleboard Made From Bamboo Skin Wastes”
(Won Silver Medal Award)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
18 – 20 May 2007
Malaysia Technology Expo (MTE) 2007
(Inventor)
· Kamarulzaman Nordin & Shahril Anuar Bahari
“Eezy-Picture Frame”
Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia
29 – 31 March 2007
Inventions, Innovations and Designs (IID) 2007 Exhibition and Competition
(Inventor)
· Kamarulzaman Nordin & Shahril Anuar Bahari
“Eezy-Picture Frame”
(Won Gold Medal Award)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Mashitah Abu Kassim
“Moulded Laminated Bamboo Lumber for Furniture Components”
(Won Silver Medal Award)
· Shahril Anuar Bahari, Mohd Ikram Ariffin, Mansur Ahmad & Kamarulzaman Nordin
“Potential of Bamboo as an Alternative Raw Material through Production of Bio-Composite Panel Board for Interior Construction Uses”
(Won Bronze Medal Award)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
“Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load”
(Won Bronze Medal Award)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
“Effect of Culm Height Levels and Node Presence on Maximum Bending Stress of Semantan Bamboo (Gigantochloa Scortechinii) Strips”
(Won Bronze Medal Award)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mansur Ahmad & Mohd Ariff Jamaludin
“Particleboard Made From Bamboo Skin Wastes”
(Won Bronze Medal Award)
· Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh
“Five Layer Sandwiched Bamboo Particleboard”
(Won Bronze Medal Award)
Institute of Research, Development and Commercialization (IRDC) UiTM
Sri Budiman Hall (DSB), UiTM Shah Alam, Malaysia
24 – 25 January 2007
The British Invention Show 2006
(Inventor)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
“Environmental-Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
(Won Gold Medal Award)
Alexandra Palace, London, UK
18 – 21 October 2006
Mini Exhibition: Bio-Composite and Furniture Technology Program Promotion (Secretariat)
Faculty of Applied Sciences, UiTM Malaysia
4 – 6 & 11 – 13 September 2006
Independent Day Festival (FESKEM) Exhibition and Sale- Furniture and Bio-Composite Products
(Students’ Advisor)
Padang Kawad, UiTM Shah Alam, Malaysia
25 – 31 August 2006
Science & Technology Exhibition: Bio-Furniture Theme
(Students’ Advisor)
Annex Hall, UiTM Shah Alam, Malaysia
15 – 16 July 2006
17th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2006 Exhibition and Competition
(Inventor)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
“Environmental-Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
(Won Silver Medal Award)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
19 – 21 May 2006
Program Exhibition and Promotion for Hari Bertemu Pelanggan UiTM
(Exhibitor)
Sri Budiman Hall (DSB), UiTM Shah Alam, Malaysia
11 – 12 March 2006
Education Carnival Exhibition (Bio-Composite and Furniture Technology Program Promotion)
(Exhibitor)
Kedah Matriculation Colleague, Changlun, Malaysia
25 – 26 February 2006
Exhibition of Interflour-UiTM-Commercialization and Research Centre
(Exhibitor)
Innovation Centre, UiTM Shah Alam, Malaysia
22 February 2006
Agricultural-Based Industry Expo (EIAT)-FAMA 2006
(Exhibitor)
Malaysian Agricultural Research and Development Institute (MARDI)
Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia
19 February 2006
Inventions, Innovations and Designs (IID) 2006 Exhibition and Competition
(Inventor)
· Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin
“Failure Properties of Betong Bamboo Strips Loaded in Bending”
(Won Bronze Medal Award)
· Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin
“Environmental-Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material”
(Won Silver Medal Award)
Institute of Research, Development and Commercialization (IRDC) UiTM
Sri Budiman Hall (DSB), UiTM Shah Alam, Malaysia
19 – 20 January 2006
Exhibition on Wood-Based and Bio-Composite Products for Opening Ceremony of Rimba Bandar Bukit Bauk, Dungun, Malaysia
(Exhibitor)
Rimba Bandar Bukit Bauk, Dungun, Malaysia
7 August 2005
Exhibition of Wood-Based and Bio-Composite Products for Workshop on Multidisciplinary and Collaborative Research Opportunities in Applied Sciences (Exhibitor)
Faculty of Applied Sciences, UiTM Malaysia
28 July 2005
16th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2005 Exhibition and Competition
(Inventor)
· Kamarulzaman Nordin, Zainal Ripin, Mohd Ariff Jamaludin, Mansur Ahmad, Shahril Anuar Bahari & Mohd Nazarudin Zakaria
“New Concept Modular Console Table”
(Won Bronze Medal Award)
Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia
19 – 21 May 2005
Asia Pacific Natural Products Expo (NATPRO) 2005
(Exhibitor)
· Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad, Shahril Anuar Bahari & Mohd Nazarudin Zakaria
“Laminated Bamboo Strips-Floor I-Joist (LBS-FIJ)
Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia
14 – 16 April 2005
Institute of Graduate Study (IGS) Information Day
(Exhibitor)
Institute of Graduate Study (IGS) UiTM
Annex Hall, UiTM Shah Alam, Malaysia
20 January 2005
NON-ACADEMIC ACTIVITIES
Bio-Composite Technology Dinner and Sports Day
(Participant)
Bougainvilla, Port Dickson, Malaysia
28 – 29 March 2009
Malaysian Timber Council’s Annual Dinner 2008
(Participant)
Hilton Hotel, Kuala Lumpur, Malaysia
17 July 2008
Furniture Technology Pre-Graduation Night
(Participant)
Golden Strait Villa, Port Dickson, Malaysia
22 March 2008
Majlis Berbuka Puasa (Bio-Composite Technology Program)
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
28 September 2007
Counselling Talk for Bio-Composite Technology Students
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
15 April 2007
Sports Day: Super Sunday
(Participant)
Sports Arena, UiTM Malaysia
1 April 2007
Kayaking With Bio-Composite Technology Students
(Participant)
Shah Alam Lake Garden, Shah Alam, Malaysia
23 September 2006
Bio-Composite Barbeque Party
(Participant)
Faculty of Applied Sciences, UiTM Malaysia
23 September 2006
Furniture Technology Pre-Graduation Dinner
(Participant)
Quality Hotel, Shah Alam, Malaysia
15 September 2006
Furniture Technology Pre-Graduation Dinner
(Participant)
Grand Blue Wave Hotel, Shah Alam, Malaysia
8 April 2006
PROFESSIONAL MEMBERSHIPS
Member
Malaysian Association of Creativity and Innovation (MACRI)
April 2009 - Present
Member
Society of Wood Science and Technology
February 2009 – Present
Member
Forest Products Society
February 2009 – Present
Orang yang tidak pernah merasa kepahitan tidak akan kenal erti kemanisan
Membangunkan bangunan adalah mudah untuk dibangunkan, tetapi membangunkan pembangunan orang yang membangunkan bangunan itu adalah sukar untuk dibangunkan...
Membangunkan bangunan adalah mudah untuk dibangunkan, tetapi membangunkan pembangunan orang yang membangunkan bangunan itu adalah sukar untuk dibangunkan...
Delivering Talk at Annual Timber Research and Industry Briefing, KL (April 2009)
Microscopic Failure of Betong Bamboo (Dendrocalamus asper) Strip Loaded in Shear Parallel to Grain
Mechanics of Material: Cross-Section View
Hari Raya 'Aidiladha (Dec 2008)
ITEX 2005: Photography Session
Delivering Speech at National Conference on Forest Products (NCFP), Legend Hotel, KL (October 2008)
Langkawi, Malaysia
ITEX 2005, as a member of research group. We won bronze medal!
1994 - 2003
Rantau Panjang, Kelantan, Malaysia
With Mat Zin at Golok Bus Station, Thailand
Mr Shahril with his parent during BSc Convocation (June 2002)
Mr Shahril with Naza, Mawi & Yanto
With Shahkamarudin & Nasa Othman
Shah Alam, Malaysia
Mr Shahril with (from L to R) Krishna Kumar, Rahman Samadi & Syafril Tang
Mr Shahril with Mr Syafril Tang
With BCT students at Tg Piai, Johor, Malaysia
We are standing at the southern most tip of mainland Asia
Delivering talk at CSSR Seminar, Kuching, Malaysia (2004)
Shahril with (from L to R) Azhar and Rusdin at a conference in Kuching (2004)
Lecture & Laboratory Session
IID 2006, won bronze medal
S & T 2006
August 2006
Being awarded a silver medal for one of his research, from Prof Rahmat, the then UiTM's DVC (2006)
Biomass Camp, Taman Negara, with Suriana, Dr Mansur & Dr Nazip (Dec 2006)
Bujang Lapok scene at Biomass Camp, Taman Negara (Dec 2006), featuring Eni, Sudin, Ajis & Ramlee
Delivering talk at ICAMN, Langkawi, Malaysia (2007)
International Conference on Advancement in Materials and Nanotechnology (ICAMN) 2007
Science & Technology Exhibition 2007
IID 2007
Shahril has been invited to share joys with (from l to r) Pendi, Ali,Ali's wife,Lin & Daughter
Geneva, Switzerland (April 2008)
Geneva (March 2008)
Geneva, Switzerland (March 2008)
Being evaluated by a group of juries at Geneva's invention April 2008
Lunch at Rotorua, New Zealand (Nov 2008)
Tauranga City, New Zealand (November 2008)
Delivering Talk at Bio-Based Composite Conference, Novotel Hotel, Rotorua, New Zealand
With Bio-Composite students at FIBERSIT SDN BHD, Ipoh, Malaysia (December 2008)
Academic-Industrial visit to BERNAS, Kuala Perlis, Malaysia (December 2008)
WELCOME TO UiTM WEBSITE
ITEX 2007 NEWS
www.swissinfo.ch: GENEVA NEWS
RMI, UiTM: GENEVA NEWS
Sinar News: Geneva 2008
Harian Metro News: Geneva 2008